[Coco] DSKINI glitch while using physical drive 1 and SDC DOS 1.5

[Rietveld Rietveld]

Hi.   I'm I just did a

POKE 65497,0

Then

DSKINI1

The disk formated and gave the

'OK' prompt

Is there a fix that can be made to the SDC dos so I don't need to do the highspeed POKE before the DSKINI

BTW thanks Arthur.   The POKE did the trick

Sent from my BlackBerry Passport Red Edition.
  Original Message
From: Arthur Flexser
Sent: Sunday, September 3, 2017 1:21 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] DSKINI glitch while using physical drive 1 and SDC DOS 1.5


Sounds like the problem is that interrupts are not getting re-enabled, so
that the timer for shutting off the drive motor has stopped counting down.

Art

On Sun, Sep 3, 2017 at 1:12 PM, Darren A <mechacoco at gmail.com> wrote:

> On Sun, Sep 3, 2017 at 10:56 AM, Rietveld Rietveld wrote:
>
> > Just 'hangs'. No 'ok' prompt until I do a reset
> >
> >
> But can you hear the drive head stepping occasionally?
> Try setting the appropriate High-Speed poke for your CoCo before doing the
> DSKINI and see if that makes a difference.
>
> High-Speed poke for CoCo 1 or 2:
>   POKE  65495,0
>
> High-Speed poke for CoCo 3:
>   POKE  65497,0
>
>
> - Darren
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco