[Coco] Altera

Michael Furman n6il at ocs.net
Fri Oct 20 11:43:54 EDT 2017


Ed,

How hard would it be for you to add a power connector to the analog board re-run? On my DE-1 the power supply is just _barely_ sufficient and sometimes it doesn't turn on the first time.

--
Michael R. Furman
Email: n6il at ocs.net
Phone: +1 (408) 480-5865

> On Oct 19, 2017, at 2:02 PM, John B <trymyz at gmail.com> wrote:
> 
> That would be great.  I am definitely interested.  Mark me down for one.
> 
>> On Thu, Oct 19, 2017 at 4:57 PM, Zippster <zippster278 at gmail.com> wrote:
>> 
>> John,
>> 
>> I don’t have any right now, but I’m considering another run as there seems
>> to
>> be enough interest again.
>> 
>> They were $110 including a new plexi top plate and proper standoffs when
>> I did them last time, mostly due to the very expensive SRAMs used.
>> 
>> I’ll have to reprice everything as it’s been quite a while, hopefully I can
>> knock that cost down a little.
>> 
>> I’ll make some posts and see if there’s enough demand to do a run of
>> boards.
>> 
>> - Ed
>> 
>> 
>>> On Oct 16, 2017, at 4:20 PM, John B <trymyz at gmail.com> wrote:
>>> 
>>> Ed,
>>> 
>>> How much are the analog boards?  Do you currently have any extras?
>>> 
>>>> On Mon, Oct 16, 2017 at 3:05 PM, Zippster <zippster278 at gmail.com> wrote:
>>>> 
>>>> Just as a side note…
>>>> 
>>>> He seems to have quite a few available, and this would be a good
>>>> opportunity for
>>>> people to get into the CoCo3FPGA project.
>>>> 
>>>> I can do another run of analog boards to go along with the DE1 if
>> there’s
>>>> enough interest,
>>>> and we can get a bunch of new users set up.
>>>> 
>>>> - Ed
>>>> 
>>>> 
>>>>> On Oct 16, 2017, at 1:31 PM, Salvador Garcia via Coco <
>>>> coco at maltedmedia.com> wrote:
>>>>> 
>>>>> It is impossible to determine what a fair offer is for the seller. If
>>>> $75USD is a good deal, I am not sure how much lower he is willing to
>> go. I
>>>> have sent him an offer for $65 USD. If he accepts I'll pay that. If not
>>>> I'll just pay the $75 USD. Salvador
>>>>> 
>>>>> 
>>>>>  On Monday, October 16, 2017, 10:14:12 AM CDT, Zippster <
>>>> zippster278 at gmail.com> wrote:
>>>>> 
>>>>> These normally sell new for $150-$160 plus shipping.
>>>>> 
>>>>> $10 does indeed sound a bit low…  :)
>>>>> 
>>>>> Under $100 is a good deal on a DE1 board.
>>>>> 
>>>>> - Ed
>>>>> 
>>>>> 
>>>>>> On Oct 16, 2017, at 10:03 AM, Salvador Garcia via Coco <
>>>> coco at maltedmedia.com> wrote:
>>>>>> 
>>>>>> Offering $10 or $20USD seems low. Dave mentioned offering $10USD less
>>>> than what the seller was asking for. If he is asking for $75 then an
>> offer
>>>> of $65 might be accepted.
>>>>>> 
>>>>>> Salvador
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>>   On Sunday, October 15, 2017, 11:32:04 PM CDT, Carlos Camacho <
>>>> idevgames at gmail.com> wrote:
>>>>>> 
>>>>>> So I made a bid for $10 and it was declined. Then a bid for $20 and it
>>>> was
>>>>>> declined. With the high shipping costs it looks less than ideal.
>>>>>> 
>>>> 
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



More information about the Coco mailing list