[Coco] NitrOS9 question

[Dave Philipsen]

Ok, so now I am delving in to vtio.asm and I've hit another brick wall.  
I thought I had all of the files required to build NitrOS9 but I see a 
reference to a file called "systype" in the defsfile. My defsfile only 
references os9defs, rbfdefs, scfdefs, and cocodefs.  Where do I find the 
systype file?  Perhaps it contains the refrerence for SHFTCLR and ohers.

Dave


On 10/5/2017 4:12 PM, David Ladd wrote:
> Dave,
>
> I have not tried NitrOS-9 L2 as a headless configuration yet.  Looking at
> the headless section in the build process for the NitrOS-9 Project.  I
> don't see the keyboard, joy, or snd driver in the headless area so that is
> a good sign.  I do see a scdwv.dr and term_scdwv.dt which tells me that you
> probably can use the term_sc6551.dt and sc6551.dr.
>
> I myself can not verify this as my CoCo3FPGA is not in working condition
> right now.  As soon as I get my Analog board back I will certainly try some
> of this out.
>
> +-----------------------------------------------------------------------+
> | David Ladd a.k.a. PacoOtaktay a.k.a. Drencor                          |
> | YouTube: http://www.youtube.com/user/PacoOtaktay                      |
> | YouTube Gaming Live: https://gaming.youtube.com/user/PacoOtaktay/live |
> | Websites: http://dwladd.com     &     http://www.theterrorzone.com    |
> | G+:  https://plus.google.com/113262444659438038657                    |
> | G+:  https://plus.google.com/+DavidLaddPacoOtaktay                    |
> |                                                                       |
> | Do you have your CoCo 3 yet?                                          |
> +-----------------------------------------------------------------------+
>
>
> On Thu, Oct 5, 2017 at 2:25 PM, Dave Philipsen <dave at davebiz.com> wrote:
>
>> Ummm....I shouldn't need to.  I've defined T2 as the default console in
>> Init.
>>
>> In fact, as I'm writing this I just tried adding Term back into the
>> bootfile and I still have the same problem.  I get the Init and sysgo
>> sign-on banners but the shell is not chained.
>>
>>
>> Dave
>>
>>
>>
>> On 10/5/2017 2:04 PM, David Ladd wrote:
>>
>>> Dave,
>>>
>>> I think you still need a TERM descriptor?  Though in this case you
>>> probably
>>> need a TERM descriptor based on T2?
>>>
>>> +-----------------------------------------------------------------------+
>>> | David Ladd a.k.a. PacoOtaktay a.k.a. Drencor                          |
>>> | YouTube: http://www.youtube.com/user/PacoOtaktay                      |
>>> | YouTube Gaming Live: https://gaming.youtube.com/user/PacoOtaktay/live |
>>> | Websites: http://dwladd.com     &     http://www.theterrorzone.com    |
>>> | G+:  https://plus.google.com/113262444659438038657                    |
>>> | G+:  https://plus.google.com/+DavidLaddPacoOtaktay                    |
>>> |                                                                       |
>>> | Do you have your CoCo 3 yet?                                          |
>>> +-----------------------------------------------------------------------+
>>>
>>>
>>> On Thu, Oct 5, 2017 at 1:16 PM, Dave Philipsen <dave at davebiz.com> wrote:
>>>
>>> Ok, so I've successfully eliminated CoWin, KeyDrv, SndDrv, JoyDrv, RBDW,
>>>> DWIO, RAMD, R0, and Term from my bootfile and the CoCo3FPGA boots up
>>>> with a
>>>> shell on T2.  But, when I try to remove VTIO I get the signon message
>>>> from
>>>> Init on T2 but I don't get a shell.  To my knowledge VTIO is simply a
>>>> device driver module for the SCF window devices.  If I have no window
>>>> device descriptors in the bootfile, then, why is VTIO needed?  See output
>>>> from 'mdir' below:
>>>>
>>>>
>>>> KrnP2       Init        Clock       Clock2      IOMan       RBF
>>>> SCF         PipeMan     RBSuper     LLCoCo3FPGA Piper SD1
>>>> DD          SC6551      VTIO        T2          Pipe CCBKrn
>>>> MDir        Shell       Date        DeIniz      Echo Iniz
>>>> Link        Load        Save        Unlink
>>>>
>>>>
>>>> Dave
>>>>
>>>>
>>>>
>>>>
>>>> On 10/3/2017 11:12 PM, Dave Philipsen wrote:
>>>>
>>>> Yep, it's an FPGA board so it's a synthesized 6809 running at 25 MHz.
>>>>> Dave
>>>>>
>>>>> On 10/3/2017 9:23 PM, Brett Gordon wrote:
>>>>>
>>>>> I take it your platform is also 6809 based? Cool.. Sounds like a neat
>>>>>> idea.  Loads of fun.  kudos on the bootloader mod - submit patch!
>>>>>>
>>>>>> brett
>>>>>>
>>>>>>
>>>>>>
>>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>
>>>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>>