[Coco] Drivewire issues

[Bill Pierce]

NitrOS9 3.29 has MANY problems. Especially involving DW4.
Please upgrade to NitrOS9 3.3.0 and you may see a lot of problems disappear.

http://sourceforge.net/projects/nitros9/files/releases/v3.3.0/

 

 


Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
Global Moderator for TRS-80/Tandy Color Computer Forums
http://www.tandycoco.com/forum/

E-Mail: ooogalapasooo at aol.com


 

 

-----Original Message-----
From: Theodore (Alex) Evans <alxevans at concentric.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Sun, Nov 22, 2015 8:17 pm
Subject: Re: [Coco] Drivewire issues

On 11/22/2015 04:13 PM, Theodore (Alex) Evans wrote:> Thanks for the effort so far. You have given me a couple good things> to check.  Ok, I definitely have an X0 module. I am not booting off> drivewire. X0 is a blank image created by the server with the "dw> disk create 0" command. The baud rate is the default 115200 set by> the wizard. I have never had any troubles using that USB serial> adapter with my z88 though the baud rate is far lower.A little followup with some more info.  The exact NitrOS9 version is3.2.9 and I indeed do not have the scdwv, N, or N1-N31 modules.  I wasdoing my testing on a machine running raspbian wheezy kernel version4.1.7 and my version of the JVM is 1.8.0.-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco