[Coco] Zap 0.0.4 Beta has been uploaded to my drop box

[K. Pruitt]

>
>> There seems to be a blind spot covering portions of at least 3 of the 
>> house
>> codes when using the RS232 pak.
>
> <snip>
>
> Okay, I went through all 256 codes one by one, both on and off.  Here are 
> the results:
>
> Housecode L does not respond on any of the unit codes.
>
> Housecode M does not respond on unit codes 9-16
>
> Housecode O does not respond on unit codes 9-16
>
> Why these 32 units do not respond to commands is a complete puzzle to me.
>
>

Okay, it may just be something environmental going on here.  I say this 
because now I am having intermittent issues with housecode A.  If I could 
just see in the electromagnetic spectrum I could solve this issue pretty 
quickly.  Is there a math formula or a reading on a multimeter or other 
device or anything that would allow me to get a glimpse in to what is going 
on in the electromagnetic spectrum... specifically the RF portion around 
this device.  The thing is right next to my CM8 monitor.  One with an iffy 
capacitor.  Kind of hard to relocate the monitor away from the Coco.  Do I 
plug a DB9 to Ball 'o Aluminum Foil adapter to the thing to increase it's 
range? LOL.