[Coco] CoCo SDC - Payment, shipping information, & update
Ronivon Costa
ronivon.costa at gmail.com
Mon Oct 13 02:49:20 EDT 2014
Still time to get onboard?
I was not following this, dummy me.
I would like a full kit:
Ronivon Costa
On 12 Oct 2014 02:53, "Zippster" <zippster278 at gmail.com> wrote:
> Hi guys,
>
> This email is to clarify how things will work on this run of SDC boards.
>
> Status:
> The pcbs, ic's, and all of the other parts for kits have been ordered.
> I'll be programming the chips and putting the kits together while
> we are waiting for the board order to arrive.
>
> The PCBs take about 2 weeks to be manufactured and delivered.
> I expect them sometime around the 25th.
>
> I'll ship out the kits first, then the assembled boards as they are
> put together.
>
> The order list is at the end of this post. If you want to make any changes
> or clarifications just let me know.
>
> Options:
>
> 1) PCB board and programmed IC's, $20 per set
>
> 2) "Full kit" - PCB and all parts, including IC's & SD module, $25 per kit
>
> 3) Fully assembled CoCo SDC, $35 ea
>
> US Shipping:
> If you are in the US, shipping will be by USPS Priority Mail Small Flat
> Rate Box. This is a flat $5.95 to US destinations.
> So for US addresses please add $5.95 for shipping.
>
> International shipping:
> If you are outside the US, it's hard for me to accurately estimate
> shipping.
> Based on other boards I've sent internationally, I'm guessing it will be
> around $15, or a bit more depending on how many you are getting.
> So for international, please add $15 USD for shipping.
> If it's significantly different when I send it (more than a dollar or two),
> we can make an adjustment through Paypal.
>
> Payment:
> Payment will be through Paypal.
> My Paypal address is the same as my email (zippster278 at gmail.com).
> Please use the "family and friends" option so that I don't get dinged with
> fees.
> I will be sending everyone an email when their board/kit is ready to be
> sent, asking for payment at that time.
>
> I have had a few people want to pay earlier. That is fine as well.
>
> I think that should pretty much cover it...
>
> Thanks everyone,
>
> - Ed
>
>
> CoCo SDC Boards
>
> Louis Ciotti - 2, boards & chips
> Brian Blake - 3, full kits
> Christopher Fox - 1, assembled
> Kip Koon - 3, full kits
> Tim Lindner - 2, full kits
> Christopher Hawks - 1, assembled
> William Astle - 2, assembled
> Philipe Zeigler - 1, assembled
> Eddie P. - 2, assembled
> Mike Craig - 1, full kit
> Tim Fadden - 2, assembled
> Steven Hirsch - 1, not assembled
> Grumpyx (Malcom) - 2, full kits
> Gene Heskett - 1, full kit
> Michael Rowen - 2, assembled
> Derryl Cummings - 2, assembled
> Tony (tonym) - 2, assembled
> Josh Harper - 6, not assembled, 1 assembled
> Stephen Pereira - 1, assembled
> Steve Ostrom - 1, assembled
> Richard Goedeken - 2, not assembled
> William Locklear - 1 or 2 full kits
> Sylvain Rousseau - 1, assembled
> JP Samson - 1, full kit
> Scott O'Brian - 1, full kit
> Richard (rcislip) - 1, assembled
> Benoit Bleau - 1 assembled, 1 full kit
> Didier Derny - 2, not assembled
> Al Hartman - 2, full kits
> Bruce Calkins - 2, not assembled
> Tormod Volden - 2, full kits
> Chris Osborn - 2, full kits
> theczar7 - 2, not assembled
> Aaron Wolfe - 2, assembled
> John Shepard - 1, assembled
> Chester Patterson - 1, assembled
> Theadore Evans - 2, not assembled
> Guillaume Major - 2, assembled
> Daniel Campos - 1
> Jerry Morelli - 1, assembled
> Dan (@quakka.com) - 1 assembled, 1 full kit
> Bob Devries - 1, assembled
> Richard Goedeken - 2, full kit
> Grumpyx - 2, full kit
> Jim Okeefe - 1, full kit
> Jason (jmlaw) - 1, assembled
> Geoffrey Cox - 1, assembled
> Ken H. (dragon.atv) - 1, assembled
> Jim Carpenter - 1, full kit
> David Linsley - 1, full kit
> Rick Porter - 1, assembled
> Shane Broadbent - 1, full kit
>
> zippster278 - 3
>
> Total: 88
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
More information about the Coco
mailing list