[NHRC-user] macro question nhrc-6

[Jeff Otterson]

Hi,
   Make sure that you are getting reliable DTMF decoding on both ports.

   Jeff..


At 10:34 PM 9/29/2002, you wrote:
>thanks jeff..
>i think i got a friggedd up ht..
>for a test i just used a differant radio and antenna..worked fine on port2
>it doesnt work on my mobile either tho..maybe i have the levels too high for
>the recv..
>ill do a little more research on it..
>thanks agn. john-ka1eks
>
>-----Original Message-----
>From: nhrc-user-admin at nhrc.net [mailto:nhrc-user-admin at nhrc.net]On
>Behalf Of Jeff Otterson
>Sent: Sunday, September 29, 2002 10:16 PM
>To: nhrc-user at nhrc.net
>Subject: Re: [NHRC-user] macro question nhrc-6
>
>
>Hi John,
>    The NHRC-6 can accept commands on each port.
>
>    Jeff
>
>
>
>At 09:49 PM 9/29/2002, you wrote:
> >hello everyone who is out there..
> >can anyone confirm if a macro command will be allowed via the second radio
> >port..? seems a macro command sent to the controller is only accepted via
> >the primary radio port #1..or do i have a setting off?
> >
> >thanks john-ka1eks
> >
> >_______________________________________________
> >NHRC-user mailing list
> >NHRC-user at nhrc.net
> >http://two.pairlist.net/mailman/listinfo/nhrc-user
>
>_______________________________________________
>NHRC-user mailing list
>NHRC-user at nhrc.net
>http://two.pairlist.net/mailman/listinfo/nhrc-user
>
>_______________________________________________
>NHRC-user mailing list
>NHRC-user at nhrc.net
>http://two.pairlist.net/mailman/listinfo/nhrc-user