[Coco] 64K Coco mode and the MC6883

[Arthur Flexser]

Line 20 should contain colons between the statements rather than semicolons.  That would account for the ?SN error, at least.

It looks to me like there's a programming error in line 10.  The intent seems to be to poke the 59 bytes worth of ML code represented by the data values into a string, and then execute the string data where it winds up after being poked into memory.

But VARPTR does not do this:  it points to the location in the program's variable storage area just above the end of the program where the string descriptor is located.  The third and fourth bytes of the string descriptor point to the memory location in the string storage area, near the top of memory, where the actual data values reside.  Those are the bytes that the exec address should point to.

Art
________________________________
From: Coco <coco-bounces at maltedmedia.com> on behalf of RETRO Innovations via Coco <coco at maltedmedia.com>
Sent: Monday, March 27, 2023 2:39 AM
To: coco at maltedmedia.com <coco at maltedmedia.com>
Cc: RETRO Innovations <go4retro at go4retro.com>
Subject: Re: [Coco] 64K Coco mode and the MC6883

Note: This message originated from outside the FIU Faculty/Staff email system.


On 3/26/2023 8:18 PM, Sean Conner via Coco wrote:
> 10 CLEAR 999:FOR I=1 TO 59:READ B:P$=P$+CHR$(B):NEXT I:P=VARPTR(P$)+1:POKE P,126
> 20 PRINT"HIT ANY KEY TO RUN TEST";EXEC P;PRINT
> 30 A=253:M$="ROM-1":GOSUB100
> 31 A=A+1:M$="ROM-2":GOSUB100
> 33 A=A+1:M$='ROM-3":GOSUB100
> 40 END
> 90 DATA 52,3,173,159,160,0,39
> 91 DATA 250,26,80,79,183,255,223
> 92 DATA 183,128,0,183,160,0,183
> 93 DATA 192,0,76,183,255,222,183
> 94 DATA 128,0,183,160,0,183,192
> 95 DATA 0,183,255,223,182,128,0
> 96 DATA 151,253,182,160,0,151
> 97 DATA 254,182,192,0,151,255
> 98 DATA 183,255,222,53,131
> 100 PRINT M$;": ";
> 110 IF PEEK(A)=1 THEN PRINT "NO SWITCH NEEDED" ELSE PRINT "SWITCH NEEDED"
> 120 RETURN

Hmmm, I copied that into a file, converted it to BASIC tokens with decb,
and then ran it in XRoar using a CoCo2 NTSC.

At first, I got a ?SN ERROR IN 20

I replaced line 20 with EXEC P and then ran again.  It then just went
unresponsive.

Can you verify this works for you?  I tried on a real CoCo 2 with the
same results.

Jim

--
RETRO Innovations, Contemporary Gear for Classic Systems
www.go4retro.com<http://www.go4retro.com>
store.go4retro.com


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco