[Coco] CoCo Emulators

[Robert Gault]

Steve,There is a different problem that I don't yet have an answer for.Try the following. Remove from your program everything connected with GET and PUT. Just do a100 FOR X=30 TO 46110 FOR Y=0 TO 16
120 PSET(X,Y)130 NEXT Y,X140 PSET(30,0)150 PRESET(30,0)160 GOTO140
Use whatever line numbers will fit into your program. You will see that you will flicker the dot at 30,0.So clearly the problem is that PUT did not place the square at the location you wanted.
If you have any question about where x=30 is on your screen, draw a line from 30,0 to 30,191.
Sent from AT&T Yahoo Mail on Android 
 
  On Sun, Mar 21, 2021 at 11:00 PM, Steve Ostrom<smostrom7 at comcast.net> wrote:   Just to satisfy my mind, that maybe the manual had a misprint, I tried increasing the DIM to (17,17) and got the same result.  I then tried (20,20) and got the same result.  There must be a different explanation for why my test program is not PUTting at (30,0).  Any more ideas?  I’m sure it’s somewhere in my coding.  Thanks!!

--- Steve ---


Sent from Mail for Windows 10

From: Robert Gault
Sent: Sunday, March 21, 2021 8:14 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] CoCo Emulators

Keep in mind that when you DIM W(16,16) that is a 16 by 16 package. However, when you talk about a screen location at say 30 or a GET (0,n)-(16,m) you have moved 31 spaces or grabbed 17 units.When you start at 0 and go to n, that is a change of n+1.
Sent from AT&T Yahoo Mail on Android 
 
  On Sun, Mar 21, 2021 at 8:50 PM, Steve Ostrom<smostrom7 at comcast.net> wrote:  OK, I fired up my CoCo 3 and I get the same result as the emulator.  So I must be making an error in my understanding of the PUT function.

PUT(30,0)-(46,16),W must not put the graphics starting at (30,0).

--- Steve ---


Sent from Mail for Windows 10

From: Steve Ostrom
Sent: Sunday, March 21, 2021 7:22 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] CoCo Emulators

Thanks for confirming my suspicions about INT. The newer CoCo 3 manual does state it correctly and the older Getting Started manual does not.

I am having a problem with the PUT function in the VCC emulator.  It’s not working like I assume it would, or I’m making a huge blunder.  Here is a simple code to illustrate.

100 PCLEAR4
110 DIM W(16,16)
120 PMODE 4,1
130 PCLS
140 SCREEN 1,0
150 FOR X=0 TO 16
160 FOR Y=0 TO 16
170 PSET(X,Y)
180 NEXT Y
190 NEXT X
200 GET(0,0)-(16,16),W
210 PUT(30,0)-(46,16),W
220 PSET(30,0)
230 PRESET(30,0)
240 GOTO 220
250 END

This code should create a 17x17 pixel solid square in the upper left corner of the screen starting at (0,0).  Then it should copy and paste that square 30 pixels to the right, starting at (30,0).  Then the PSET and PRESET loop should blink that pixel at (30,0).  When I run this program, the blinking pixel is not the upper left corner of the pasted square.  So PUT is not pasting the square at where I expect it to.  I’d appreciate it if someone could show me where I’m not understanding the GET and PUT functions.

Thanks!  (I told you I’d probably have more questions about the emulator !!  😊)

--- Steve ---




-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco