[Coco] Help with Nitros9 on SDC?

[michaelkline704 at gmail.com]

That's it! 

Doug hit it on the head. I didn't realise that /H1 is being used in the EOU
project now, instead of /D1. /D0 and /D1 are listed in MDIR. I haven't made
any mods to NitrOS9. My copy is a "Stock" copy.

Many thanks!
Michael
 

-----Original Message-----
From: Coco <coco-bounces at maltedmedia.com> On Behalf Of Doug Fraser
Sent: 10 April 2021 10:00
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Subject: Re: [Coco] Help with Nitros9 on SDC?

Michael,

By using the mdir command, you'll get a list of all modules in memory. IIRC,
drive 1 is '/h1' .

However, issue the mdir command to see the modules in memory, that is a good
starting point.

Doug

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Coco <coco-bounces at maltedmedia.com> on behalf of
michaelkline704 at gmail.com <michaelkline704 at gmail.com>
Sent: Saturday, April 10, 2021 6:51:45 AM
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Subject: Re: [Coco] Help with Nitros9 on SDC?

Hi Everyone:

I haven't been using my Coco for a couple of months. I have a NitrOS9
question.

I have 6.0.1. When I type "dir /d1" I totally lockup. Curtis had written to
someone else about using "dir /sd1". When I do that, I get Error #221 -
Module not found.

What do I need to do to get access Drive 1 on the SDC?

Michael


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco