[Coco] Sort of OT: Recapping

edward jaquay ejjaquay at gmail.com
Mon Nov 30 10:50:01 EST 2020


Be super careful with acetone.  I know a family whose home was heavily
damaged when a floor company used it to set dye on the basement floor.
Blew the exterior doors off and the workers were very badly burned.
Investigators never did figure out what ignited it.

On Sun, Nov 29, 2020, 21:00 Gene Heskett <gheskett at shentel.net> wrote:

> On Sunday 29 November 2020 18:45:39 Salvador Garcia via Coco wrote:
>
> >  Update:
> > First, thank you all for your advice and recommendations.
> > I finally got all the through holes clear of solder and stuck leads. I
> > heated the Weller station to 850F. I noticed that at times it spiked
> > to 880F. Somewhere between these two temperatures the solder melted
> > and the solder and stuck leads came out without any problems. I
> > replaced the caps. I will now get some flux remover and clean the PCB
> > and test. Hopefully the MB will still work :-S. I am usually confident
> > with my work, but I have to admit that the PCB took a lot of heat. I
> > am hoping 0 damage. Again, thanks for your help. I will properly
> > document this experience. Salvador
>
> For flux removal, nothing in my looooooong experience beats plain old
> hardware store, paint shelf aisle, acetone and Q-tips. But don't ever
> reuse the Q-tip, cuz that will contaminate the acetone, ditch it in the
> round can under the bench and get another to wet and go after some more
> flux, its not like they are expensive.  Get your q-tips from the
> pharmacy, brand Sherwood Medical, one ended wooden sticks about 7 or 8"
> long, gives you a long enough handle to do it right. Somewhere around a
> tenner for 1000 of them in paper bags of 100, 10 bags to the carton. No
> ignition sources around the open can, or the waste can as its quite
> inflammable.
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> If we desire respect for the law, we must first make the law respectable.
>  - Louis D. Brandeis
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


More information about the Coco mailing list