[Coco] CoCoSDC on TANO Dragon

[rietveld rietveld]

You need to move both jumpers .    also if you are using an older SDC then you should upgrade the rom to DOSPLUS 5.0.     when You run 5.0 you can autostart SDCX


SDC jumper settings for a Tano Dragon https://imgur.com/gallery/YedO8GD




Sent from my BlackBerry — the most secure mobile device
From: brant.michael.l at gmail.com
Sent: August 4, 2020 1:02 AM
To: coco at maltedmedia.com
Reply to: coco at maltedmedia.com
Subject: Re: [Coco] CoCoSDC on TANO Dragon

The sec should already have the dragon dos flashed on one of the extra
banks just have to change the jumper

On Tuesday, August 4, 2020, Alex Evans <varmfskii at gmail.com<mailto:varmfskii at gmail.com>> wrote:

> How do I use a CoCoSDC on a TANO Dragon? I presume I need to flash a
> (possibly modified) ROM for one of the DOSes for the dragon onto one of the
> banks of the CoCoSDC, but which one?
>
> --
> Coco mailing list
> Coco at maltedmedia.com<mailto:Coco at maltedmedia.com>
> https://pairlist5.pair.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com<mailto:Coco at maltedmedia.com>
https://pairlist5.pair.net/mailman/listinfo/coco