[Coco] Robert Gault's DECB SmartWatch software

[John W. Linville]

On Mon, Feb 25, 2019 at 05:26:51PM -0500, Robert Gault wrote:
> John,
> 
> The source code for the NitrOS-9 SmartWatch should still be in the directories
> /3rdparty/utils/smartwatch
> at
> https://sourceforge.net/p/nitros9/code/ci/default/tree/

Yes, indeed. However, in this case I was hoping for something to use
without booting NitrOS-9. :-)
 
> I can supply programs for use with a hardware Coco3 and the Tandy Dallas DS
> 1216 hardware. That socket and ic can be put into a disk controller with a
> wiring mod but there may not be enough room to get the lid on the
> controller.
> I have taken the ROM out of the RS-232 pack and mounted the SmartWatch in
> place of the ROM. I can supply documentation for mounting the 28-pin clock
> into a 24-pin socket.

The DS1216 hardware is what I have. Whatever help you can provide
will be appreciated.

Thanks!

John

> I may be able to supply similar programs for the DS 1315 used with the
> Cloud-9 hardware. Not sure about that as I have not tested it.
> 
> Robert
> 
> John W. Linville wrote:
> > Dr. Gault,
> > 
> > Is your SmartWatch software still available? I have a device with
> > which I would like to experiment a bit...
> > 
> > Outside of NitrOS-9, is there any other software available for the
> > SmartWatch on the CoCo?
> > 
> > John
> > 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco

-- 
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.