[Coco] Usb encoder

Sat Feb 9 13:26:44 EST 2019

Thanks. Have you gotten the joysticks to work with a real CoCo?

--
M. David Johnson
mdj at bds-soft.com

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of rietveld rietveld
Sent: Saturday, February 09, 2019 7:40 AM
To: M. David Johnson
Subject: Re: [Coco] Usb encoder

Yes.    Atractmode will detect your new joystick kit as the primary input device.   You will need a keyboard to initially setup attractmode but after the initial setup everything can be done with the new joystick you can even create hot keys to exit the emulators with one of the buttons and return to attractmode GUi

Windows will automatically detect the new joystick as a 'Generic USB joystick'.    When you run Vcc just open the config menu of vcc and select joystick input.   It will default to your new 'generic usb joystick'. One thing to note is that Vcc( as well as Atari's Stella) default to BUTTON 1 as the joystick action button. This means that at least one of the 13 buttons needs to be connected to the input 1 of the encoder board.   This is the first button connector on the bottom left directly under the power connector. The rest of the emulators that I have used with it allow mapping of the buttons any way you want.   It's just these 2 that default to button 1.

Attract mode can be used to launch many of the popular emulators like retroarch, bizhawk, and MAME. Attract mode will also search the popular game sites to 'scrape' the box art to make a really cool 'hyper spin' look

I payed out my buttons so that I have a dedicated exit button on the top left. Joystick in the middle, for buttons to left of the joystick as my action keys(SNeS pattern) and 4 buttons to the right to use as a DPAD.   Then a select and start at the top of the joystick

Sent from my BlackBerry
  Original Message
From: M. David Johnson
Sent: Saturday, February 9, 2019 1:15 AM
To: 'CoCoList for Color Computer Enthusiasts'
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Usb encoder

Thank you -

The joystick kits arrived; the cases are coming in a separate shipment.

I gather that attractmode will pick up on their usb drivers and essentially plug them into MAME as joysticks.

Have you used them with Vcc? Or with a real CoCo?

--
M. David Johnson
mdj at bds-soft.com

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of rietveld rietveld
Sent: Wednesday, February 06, 2019 4:52 AM
To: M. David Johnson
Subject: Re: [Coco] Usb encoder

I am glad you found a source for it in the States. I assume that most item numbers can just be copied and pasted into your countries version of amazon

If you are planning to build a stand alone coco cab or multi platform emulator cab I would recommend using a GUI called 'atract mode'.I find it much easier to setup than HyperSpin  It is open source and allows you to launch Vcc, as well as any other emulator right from an on screen menu. The GUI uses the USB joystick (via zero delay encoder) natively. The GUI also allows you to setup the joystick and its buttons as hot keys. This way you can exit, reset, or perform a full screen with out the need of a physical keyboard.   The buttons can be easily mapped to replicate these keys

http://attractmode.org/

Sent from my BlackBerry
  Original Message
From: M. David Johnson
Sent: Tuesday, February 5, 2019 11:20 PM
To: 'CoCoList for Color Computer Enthusiasts'
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Usb encoder

You are indeed correct sir.

My order is now on its way.

--
M. David Johnson
mdj at bds-soft.com

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of tfadden
Sent: Tuesday, February 05, 2019 9:41 AM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Usb encoder

Yes they do.

If you notice the link is for amazon in Canada.

Just look for the same item at amazon.com instead.

Remember we have members from all over the world.

Cheers!

------ Original Message ------
From: "M. David Johnson" <mdj at bds-soft.com>
To: "'CoCoList for Color Computer Enthusiasts'" <coco at maltedmedia.com>
Sent: 2/5/2019 8:30:56 AM
Subject: Re: [Coco] Usb encoder

>Unfortunately, it appears that they are unable to ship to the United States.
>
>--
>M. David Johnson
>mdj at bds-soft.com
>
>
>-----Original Message-----
>From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of rietveld rietveld
>Sent: Tuesday, February 05, 2019 7:32 AM
>To: Coco mailing list
>Subject: [Coco] Usb encoder
>
>If anyone is interested this is a link to the joystick, buttons, and usb encoder I used.    This makes it easy to build a table top or bar top emulation machine as a coco
>
>
>https://www.amazon.ca/Quimat-Joystick-Function-Raspberry-QR11-W/dp/B0788NJGXL/ref=mp_s_a_1_24/135-1636618-8126067?ie=UTF8&qid=1549373308&sr=8-24&pi=AC_SX236_SY340_QL65&keywords=usb+joystick+encoder&dpPl=1&dpID=51DiZg2DpGL&ref=plSrch
>
>
>
>Sent from my BlackBerry
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco