[Coco] VCC 2.0.2 with full 6309 emulation. Runs Nitros9 EOU 6309.

[Salvador Garcia]

 I ran it on my home laptop with Win 10 64-bit. VCC came up with a black screen and closed itself after a few seconds.

I renamed VCC.ini and ran it again. Again, the black screen came up, but the app did not close itself. Unless someone suggests a course of action I can't dedicate more time this. Salvador

.
    On Wednesday, December 4, 2019, 06:22:29 PM CST, Walter Zambotti <zambotti at iinet.net.au> wrote:  
 
 Not sure either why that is.

I just made a minor tweak to hd6309.c and removed some debug printf's which wont make much of a difference, but if you want to try again I just updated the exe.

Did you replace the device dlls?

Also change the ini file.  If you decided to use the version I supplied as my dll files might be kept in different locations to your normal setup.

The one I supplied is very simple and assumes everything is the same directory as the vcc exe.

If you check the pathing in the ini file it is all absolute so you definitely need to change the paths!!!

I have also placed the source for the new hd6309 on the goggle drive as well.

I have to admit my version of VCC has a few other tweaks and that may be causing an issue so if one of you who already has a dev environment for VCC wants to try and compile the new code in and see if we can get a more stable version.

Walter

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Steve Batson via Coco
Sent: Wednesday, 4 December 2019 11:54 PM
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Cc: Steve Batson <steve_batson at yahoo.com>
Subject: Re: [Coco] VCC 2.0.2 with full 6309 emulation. Runs Nitros9 EOU 6309.

Walter,

I have not been able to get it to come up in Disk Basic. It comes up Extended Basic. The MPI and disk carts are configured, I didn’t change anything out of the box and that’s what I get. I tried tinkering around with settings, still just Extended Basic. Any suggestions?

> On Dec 3, 2019, at 9:50 PM, Walter Zambotti <zambotti at iinet.net.au> wrote:
> 
> Guys
> 
> 
> 
> OVCC now has full 6309 support and Nitros9 EOU 6309 appears to work.
> 
> 
> 
> I have back ported the hd6309.c from OVCC to VCC 2.0.1 (aka 1.43) and 
> it too appears to work.
> 
> 
> 
> For anyone who wants to try VCC with the 6309 version of Nitros9 EOU 
> then please feel free to download the binary and dlls from this location.
> 
> 
> 
> https://drive.google.com/drive/folders/1_UkjKaVeh1P4sAagpuXDVxM3EuJUz_
> 9H?usp
> =sharing
> 
> 
> 
> I have placed the EOU vhd and dsk there as well so if you already have 
> them you don't have to download them again.
> 
> 
> 
> I have changed the version of VCC from 2.0.1 to 2.0.2 so it can be 
> told apart. This is a 32 bit version.
> 
> 
> 
> Enjoy
> 
> 
> 
> Walter
> 
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco


-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco