[Coco] Model 1

[rietveld rietveld]

The original was the 3022 (not very reliable) , then the 3029(i use this one with out any problems), then fd500,fd501(the best because it uses gold connectors instead of tin), and the newest fd502

Also a lot of third part controllers.    I have a disto, Harddrive Specialist, and j&m, but there are some others

Sent from my BlackBerry 10 smartphone.
  Original Message
From: Jack Carpenter via Coco
Sent: Thursday, July 26, 2018 6:55 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Cc: Jack Carpenter
Subject: Re: [Coco] Model 1


 Thanks for the info and one thing I will need to get is the Floppy Conntroller but I think there were 4 types which one is better of the 4?

    On Thursday, July 26, 2018, 10:45:47 PM GMT, Al Hartman <alhartman6 at verizon.net> wrote:

 It will work fine. But, it either needs a Model I floppy cable with the pulled pins, because all 4 drive positions are jumpered. Or, you need to open up the drive and remove the jumpers for the drive positions other than the one you want it to be.

-[ Al ]-
On 7/26/2018 6:16:42 PM, Jack Carpenter via Coco <coco at maltedmedia.com> wrote:
Will a model 1 5.25 floppy drive work with a Coco3. If not what is not making it work?

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco