[Coco] CocoPi3 "PacoOtaktay Winter 2017-2018 Edition" now available

[Glen Hewlett]

Awesome!  Thanks Aaron for letting me know how to get it working!  This will speed up my development time, and just make it more fun!

Thanks Bill for bringing the possibility to my attention.

Cheers,
Glen

> On Nov 23, 2017, at 10:03 PM, Aaron Wolfe <aawolfe at gmail.com> wrote:
> 
> On Thu, Nov 23, 2017 at 4:34 PM, Glen Hewlett <glen.hewlett at sympatico.ca>
> wrote:
> 
> 
>> Is it possible for me to assemble a CoCo program on my Mac using Lwasm and
>> put the binary file inside the Drivewire shared .DSK file and LOADM it
>> directly on a real CoCo that has access to same the .DSK file on drive wire?
>> 
> 
> There are a few ways to do it, but the easiest is to turn on the "sync
> from" option for the drive you have the .dsk mounted in.  This will cause
> Drivewire to check the .dsk before each read and update it's cached version
> if anything has changed.  Use the toolshed util or any method you'd like to
> update the .dsk with your new binary at the end of your lwasm process, and
> the next loadm on the Coco should see it.
> 
> It's an option in the gui, you can find it by either double clicking on the
> drive and then toggling the "Sync From" button on the disk drive thing, or
> you can right click on the drive and choose parameters from the menu, then
> scroll down to syncfrom and enabled it.   There is a bit of explanation of
> this and other handy options there in the parameters section. You can also
> do this from the os9 side with "dw disk set X syncfrom true" where X is the
> drive.
> 
> Happy Thanksgiving
> -Aaron
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco