[Coco] error 249

[Bill]

Finally , someone who will give me a straight answer (AFTER I give them the information they need <GRIN>)

That just makes the head cleaning more important.

Thanks

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill Pierce via Coco
Sent: Saturday, March 18, 2017 4:19 PM
To: coco at maltedmedia.com
Cc: Bill Pierce
Subject: Re: [Coco] error 249

Bill, that looks correct for a 3.5 drive.

 

 


Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

 

My Music from the Tandy/Radio Shack Color Computer 2 & 3 https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
Global Moderator for TRS-80/Tandy Color Computer Forums http://www.tandycoco.com/forum/

E-Mail: ooogalapasooo at aol.com


 

 

-----Original Message-----
From: Bill <cwgordon at carolina.rr.com>
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Sent: Sat, Mar 18, 2017 4:16 pm
Subject: Re: [Coco] error 249

Do I change the DNS or not?Here is the ENTIRE list as it comes from a FRESH boot:DMODE /D0 nam=D0 mgr=RBF ddr=rb1773hpn=07 hpa=FF40 drv=00 stp=03 typ=21 dns=01 cyl=50 sid=02vfy=01 sct=0012 t0s=0012 ilv=03 sas=08 wpc= ofs= rwc=That is it. The same setup is also set up for /d1. I am using 3 1/2" 80tk drivesI did "ident -m rb1773", and our numbers match.I did "ident -m rbf", and again, our numbers match.This just leaves cleaning the heads on the drives.Thanks-----Original Message-----> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Robert Gault> Sent: Saturday, March 18, 2017 3:34 PM> To: CoCoList for Color Computer Enthusiasts> Subject: Re: [Coco] error 249>> Bill,>> If I understand the above, the answer seems simple but you still need to find what is wrong.> If you boot from your Coco floppy drive and can read Coco floppies correctly but get a > 249 error when booting from a DW4 disk, then there must be a problem with the rb1773,> rbf, or the D# descriptors on the DW4 disk.> The idents for rbf and rb1773 on the nos96809l2v030300coco3_dw.dsk I'm using are>> rb1773> size $5A9> crc  $A4EB50>> rbf> size $12EE> crc  $245E32> Regards the many comments about the descriptors, I am using MF2DD, 135 TPI, 80 track, > 3.5" disks in my drive#1. I can format it for single or double sides, 35, 40, or 80 > tracks per side but TYP=$21.> When format starts, it shows TPI=135. If you see something else, use dmode to change typ. -- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco