[Coco] error 249

Bill cwgordon at carolina.rr.com
Sat Mar 18 16:16:29 EDT 2017


Do I change the DNS or not?

Here is the ENTIRE list as it comes from a FRESH boot:

DMODE /D0 
nam=D0 mgr=RBF ddr=rb1773
hpn=07 hpa=FF40 drv=00 stp=03 typ=21 dns=01 cyl=50 sid=02
vfy=01 sct=0012 t0s=0012 ilv=03 sas=08 wpc= ofs= rwc=

That is it. The same setup is also set up for /d1. I am using 3 1/2" 80tk drives

I did "ident -m rb1773", and our numbers match.
I did "ident -m rbf", and again, our numbers match.

This just leaves cleaning the heads on the drives.

Thanks

-----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Robert Gault
> Sent: Saturday, March 18, 2017 3:34 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] error 249
>
> Bill,
>
> If I understand the above, the answer seems simple but you still need to find what is wrong.
> If you boot from your Coco floppy drive and can read Coco floppies correctly but get a 
> 249 error when booting from a DW4 disk, then there must be a problem with the rb1773,
> rbf, or the D# descriptors on the DW4 disk.
> The idents for rbf and rb1773 on the nos96809l2v030300coco3_dw.dsk I'm using are
>
> rb1773
> size $5A9
> crc  $A4EB50
>
> rbf
> size $12EE
> crc  $245E32

> Regards the many comments about the descriptors, I am using MF2DD, 135 TPI, 80 track, 
> 3.5" disks in my drive#1. I can format it for single or double sides, 35, 40, or 80 
> tracks per side but TYP=$21.

> When format starts, it shows TPI=135. If you see something else, use dmode to change typ. 



More information about the Coco mailing list