[Coco] Fwd: connect to a modern display

[Fred Hicks]

Bill,
   I have to crack the case open.  But I think Ed's assessment is correct.
  The channel selector switch is gone and the video out is a 3.5 millimeter
composite out.   Hopefully I might find one or two upgrades.  512 of RAM
would be nice.  I'll take a picture later and post it when I get home.

Fred

On Mon, Aug 14, 2017 at 4:06 PM, Bill Gunshannon <
bill.gunshannon at hotmail.com> wrote:

>
> ________________________________________
> From: Coco [coco-bounces at maltedmedia.com] on behalf of mike at borncoco.com [
> mike at borncoco.com]
> Sent: Monday, August 14, 2017 10:49 AM
> To: CoCoList for Color Computer Enthusiasts
> Cc: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Fwd: connect to a modern display
>
> This looks like one of Ed Sinder's Radio Shack composite board clones. It
> outputs a composite signal. You'll need a Sony type cable which goes from
> the 3.5mm jack to three outputs. Here's an example from Amazon.
>
> [ https://www.amazon.com/dp/B00CIC9KW2/ref=asc_df_
> B00CIC9KW25121969/?tag=hyprod-20&creative=395033&creativeASIN=B00CIC9KW2&
> linkCode=df0&hvadid=194017009123&hvpos=1o3&hvnetw=
> g&hvrand=8862710000465049285&hvpone=&hvptwo=&hvqmt=&hvdev=
> c&hvdvcmdl=&hvlocint=&hvlocphy=9010754&hvtargid=pla-312526707741 ](
> https://www.amazon.com/dp/B00CIC9KW2/ref=asc_df_
> B00CIC9KW25121969/?tag=hyprod-20&creative=395033&creativeASIN=B00CIC9KW2&
> linkCode=df0&hvadid=194017009123&hvpos=1o3&hvnetw=
> g&hvrand=8862710000465049285&hvpone=&hvptwo=&hvqmt=&hvdev=
> c&hvdvcmdl=&hvlocint=&hvlocphy=9010754&hvtargid=pla-312526707741 )
>
> To be really sure though, you need to open up the case and take a look at
> the board. Hope this helps.
>
> ______________________________
>
> You made me go look again.  I see now that it isn't an RCA but looks like
> an earphone jack.  Wierd.
>
> bill
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>



-- 
Tempus fugit...