[Coco] Booting OS9 on my CoCo 3

Dave Philipsen dave at davebiz.com
Tue Aug 8 11:42:05 EDT 2017


Yeah, that might be a good idea. The only problem is that I'm not 
exactly sure what I'll need in the CoCo3, software-wise, to accomplish 
that.  Is it best to boot from an alternate disk system with dw support 
built in?  I can easily burn a new ROM if you can direct me to an image.

Dave


On 8/8/2017 10:37 AM, Bill Pierce via Coco wrote:
> Dave, I agree with Robert. It could be that you have 128k and the boot is requiring 512k due to the ramdisk.
>
> Why not make a drivewire cable, boot from drivewire, then you can explore/modify your real disks and see what the problem is.
>
>   
>
>   
>
> Bill Pierce
> "Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull
>
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
>
> E-Mail: ooogalapasooo at aol.com
>
>   
>
>   
>
> -----Original Message-----
> From: Dave Philipsen <dave at davebiz.com>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Tue, Aug 8, 2017 3:12 am
> Subject: [Coco] Booting OS9 on my CoCo 3
>
> Ok, so it's been a REAL long time since I booted OS9 on my real CoCo 3 from a floppy disk.  Like almost thirty years.  So I picked up a used FD501 controller from eBay awhile back and I just now hooked up a 3.5" floppy to it.  I can format a floppy and I can save/load programs from it.  But when I try to boot an old disk (probably 30 yrs old) I get the familiar "OS9 BOOT" screen and then the floppy does a seek at what sounds like a faster step rate and then it does nothing.  Frozen with "OS9 BOOT" on the screen and the floppy is still selected with the motor running.This is a very old boot disk that I labeled "OS9 Level II System Master with ramdisk".  My old setup was a CoCo 3 with 512K and a multipak and one of the old full-size floppy controllers and an RS232 Pak.  My new setup is a CoCo 3 with 128K, no MPI,  the FD501, and a 63C09.I've got some 5.25" OS9 disks too but I don't currently have a 5.25" drive so I'm hoping to get things worked out with the 3.5" drive. It may be that the floppy is just so old it's lost some of its retentivity but I just thought I'd put it out there to see if anyone has an idea.  Maybe I'm missing something obvious.  The FD501 does not seem to work at hi-speed. Could that be the problem?Dave-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco
>




More information about the Coco mailing list