[Coco] DE1 / DE2 boards

[Dave Philipsen]

Yes.  The DE2 boards have I/O connectors that are 100% compatible with 
the analog expansion board.  At this point I have not heard of anyone 
who has yet used the analog board on a DE2.  If you want to find out 
more come on over to the CoCo3FPGA group and ask either Gary or Leslie 
about this.  I believe Gary has a DE2 and since he is the author of 
CoCo3FPGA he might be able to shed a little more light on the subject.  
Leslie has ported Gary's code to the DE2 but the last time I heard any 
information about the port it was before the analog board was available.

Dave


On 9/30/2016 2:40 PM, Salvador Garcia via Coco wrote:
> And another question:
> Are the DE2 boards compatible with the analog expansion board?
> And to pile on another question. I noticed that the is post is from June 2016. Is the information still valid?
> Thanks!Salvador
>
>
>        From: Torfinn Ingolfsen <tingox at gmail.com>
>   To: coco at maltedmedia.com
>   Sent: Friday, September 30, 2016 1:39 PM
>   Subject: Re: [Coco] DE1 / DE2 boards
>     
> On 06/10/2016 06:15, Dave Philipsen wrote:
>> By the way, in case anyone is interested, I have three used but in very
>> good condition Terasic DE2s.  The DE2 is very similar to the DE1 except
>> that it has an ethernet jack, a video DAC with more color depth, around
>> 50% more logic elements, and a few other goodies. Checked out and ready
>> to go with the latest DE2 build of Gary's project I will sell them for
>> $110 each which is still less than what you would pay for a brand new DE1.
> Where in the world are these boards located?
>
>