[Coco] Using a CoCo2 keyboard in a CoCo1

[Jayeson Lee-Steere]

Thanks Dave. I may grab some of this one when/if I ever place a Digi-Key
order:

http://www.digikey.com/product-detail/en/parlex-usa-llc/PSR1635-16/AF16-5-ND/213655

On Sun, Sep 11, 2016 at 12:02 PM, Dave Philipsen <dave at davebiz.com> wrote:

> Take a look here: Digi-Key flat cables <http://www.digikey.com/produc
> t-detail/en/parlex-usa-llc/PSR1635-15/AF15-5-ND/213643>
>
> Dave
>
>
> On 9/10/2016 10:30 PM, Mark J. Blair wrote:
>
>> On Sep 10, 2016, at 19:51, Jayeson Lee-Steere <
>>> cocolistemail at titaniumstudios.com> wrote:
>>>
>>> If it were possible to get a short length of flat flex ribbon, that could
>>> be made to work. But I can't find anything available in the ancient
>>> 2.54mm
>>> pitch. It was a bit of a surprise to even be able to get the connector
>>> new.
>>>
>> I just checked at Digi-Key. It appears that finished 0.1" flat flex
>> cables are not available, but the bulk ribbon is. I wonder how hard it is
>> to finish the ends?
>>
>>
>>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>