[Coco] DE1 / DE2 boards

Salvador Garcia salvadorgarciav at yahoo.com
Mon Oct 3 16:59:48 EDT 2016


Cool! Good to know! Salvador

      From: Dave Philipsen <dave at davebiz.com>
 To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
 Sent: Monday, October 3, 2016 3:56 PM
 Subject: Re: [Coco] DE1 / DE2 boards
   
Ok, just let me know.  When I send the board out I load it up with the 
latest stuff so it would be ready to go just by simply switching it on.

Dave


On 10/3/2016 3:50 PM, Salvador Garcia via Coco wrote:
> Thanks Dave, I'll look into it. Although I am eager to get into the CC3FPGA, I just realized that I am in the middle of various projects and fear that the DE1 would end up on a shelf. This is the second year that I've postponed this project (getting laid off in Aug '15 did not help any). Salvador
>
>
>        From: Dave Philipsen <dave at davebiz.com>
>  To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>  Sent: Monday, October 3, 2016 1:39 PM
>  Subject: Re: [Coco] DE1 / DE2 boards
>    
> Salvador,
>
> I believe that Gary has fixed the problem with the 'new' memory in his
> latest version.  That being said, I believe I have one DE1 board with
> the 'new' memory and one with the 'old' memory.
>
> Dave
>
>
> On 10/3/2016 10:06 AM, Salvador Garcia via Coco wrote:
>> Thanks Dave!
>> Personally, I am more interested in the DE1, with the modified RAM. I am a member of the Yahoo FPGA group, but honestly, with so much stuff going on right now, I have not seriously visited (I have have skimmed it though) the group ina while. At this time I do not know whether there is still a problem with the newer RAMs. If this has been resolved then I can do with a DE1 with the new RAM. If not resolved, then I definitely want to get one that has been modified. Regards, Salvador
>>
>>          From: Dave Philipsen <dave at davebiz.com>
>>    To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>>    Sent: Friday, September 30, 2016 3:22 PM
>>    Subject: Re: [Coco] DE1 / DE2 boards
>>      
>> Yes.  The DE2 boards have I/O connectors that are 100% compatible with
>> the analog expansion board.  At this point I have not heard of anyone
>> who has yet used the analog board on a DE2.  If you want to find out
>> more come on over to the CoCo3FPGA group and ask either Gary or Leslie
>> about this.  I believe Gary has a DE2 and since he is the author of
>> CoCo3FPGA he might be able to shed a little more light on the subject.
>> Leslie has ported Gary's code to the DE2 but the last time I heard any
>> information about the port it was before the analog board was available.
>>
>> Dave
>>
>>
>> On 9/30/2016 2:40 PM, Salvador Garcia via Coco wrote:
>>> And another question:
>>> Are the DE2 boards compatible with the analog expansion board?
>>> And to pile on another question. I noticed that the is post is from June 2016. Is the information still valid?
>>> Thanks!Salvador
>>>
>>>
>>>            From: Torfinn Ingolfsen <tingox at gmail.com>
>>>      To: coco at maltedmedia.com
>>>      Sent: Friday, September 30, 2016 1:39 PM
>>>      Subject: Re: [Coco] DE1 / DE2 boards
>>>        
>>> On 06/10/2016 06:15, Dave Philipsen wrote:
>>>> By the way, in case anyone is interested, I have three used but in very
>>>> good condition Terasic DE2s.  The DE2 is very similar to the DE1 except
>>>> that it has an ethernet jack, a video DAC with more color depth, around
>>>> 50% more logic elements, and a few other goodies. Checked out and ready
>>>> to go with the latest DE2 build of Gary's project I will sell them for
>>>> $110 each which is still less than what you would pay for a brand new DE1.
>>> Where in the world are these boards located?
>>>
>>>
>


-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


   


More information about the Coco mailing list