[Coco] two questions

[Tormod Volden]

On Fri, May 6, 2016 at 11:22 PM, Barry Nelson
<barry.nelson at amobiledevice.com> wrote:
>
> If you have a 6309 CPU use these files (from: https://sourceforge.net/projects/nitros9/files/releases/v3.3.0/disks/)
>
> nos96309l2v030300coco3_40d_1.dsk (Boot floppy image)
> nos96309l2v030300coco3_40d_2.dsk (Floppy disk 2)
> nos96309l2v030300coco3_dw.dsk (This image boots directly from DriveWire)
>
> If you have a 6809 original CPU use these files (also from: https://sourceforge.net/projects/nitros9/files/releases/v3.3.0/disks/)
>
> nos96809l2v030300coco3_40d_1.dsk (Boot floppy image)
> nos96809l2v030300coco3_40d_2.dsk (Floppy disk 2)
> nos96809l2v030300coco3_dw.dsk (This image boots directly from DriveWire)

And by booting directly from DriveWire, that can mean:
1. load the *_dw.dsk image in slot 0 on the DriveWire server
2a. run "DOS" if you have HDBDOS installed on the CoCo
or
2b. run DWDOS from a floppy (in your case dw3doscc3.bin, get it from
toolshed.sf.net).

Regards,
Tormod