[Coco] Using Cocodisk.exe to make bootable Nitros9 disks.

zathrasldf zathrasldf at gmail.com
Sun Jun 5 11:16:49 EDT 2016


No, it works at high speed too, it's best feature is the no-halt mode. The driver for this controller is Sdisk3 for the CoCo3.
Doug Fraser


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: "Bruce W. Calkins" <brucewcalkins at charter.net> Date: 2016-06-05  06:54  (GMT-08:00) To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> Subject: Re: [Coco] Using Cocodisk.exe to make bootable Nitros9 disks. 
Isn't the Sardis controller the one that only works at 1 MHz?
Bruce W.
= = = = = = = = =

On 06/05/2016 12:50 AM, zathrasldf wrote:
> The Sardis uses a 28 pin eprom
> Doug Fraser
>
>
> Sent from my Samsung Galaxy smartphone.
> -------- Original message --------From: Kip Koon <computerdoc at sc.rr.com> Date: 2016-06-04  21:07  (GMT-08:00) To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com> Subject: Re: [Coco] Using Cocodisk.exe to make bootable Nitros9 disks.
> Hi Zathrasldf,
> What type of eprom does the Sardis controller use?
>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>
>
>> -----Original Message-----
>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of zathrasldf
>> Sent: Saturday, June 04, 2016 2:45 PM
>> To: CoCo3 Mail List
>> Subject: [Coco] Using Cocodisk.exe to make bootable Nitros9 disks.
>>
>> I've had to use an fd-502 floppy controller as my Sardis controller hasn't
>> got a working eprom.
>> Any suggestions as to how to proceed on making a bootable disk?


-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


More information about the Coco mailing list