[Coco] CoCo SDC Firmware update with a Dragon...

[Zippster]

Hi Rogelio,

For the MCU firmware, yes.  Current version is 116, here…
<http://cocosdc.blogspot.com <http://cocosdc.blogspot.com/>>  … with installer and instructions.

All dip switches off, no jumper, do the firmware update on a CoCo.
Dip switch 1 and 3 on, jumper on DRQ, back in the Dragon. (assuming your Dragon OS is in bank 2)

BTW, the best current DOS for Dragon computers is Pere’s DOSPlus.
An updater to the current version is here (.VDK image, updates SDC from a Dragon).
<https://drive.google.com/open?id=0B1sgl615FlGnajNVV1RIR0JnN3c <https://drive.google.com/open?id=0B1sgl615FlGnajNVV1RIR0JnN3c>>

- Ed


 
> On Feb 23, 2016, at 10:46 AM, Rogelio Perea <os9dude at gmail.com> wrote:
> 
> Can it be done?
> 
> I have an SDC configured for use with the Dragon and was wondering if for
> an update I would have to set it for CoCo use and run the setup utility
> from the latest firmware DSK image on a CoCo 1/2 or 3, once the firmware is
> updated set the Dragon mode jumper back on...
> 
> 
> -- RP
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco