[Coco] The ultimate VCC hard disk image using EmuDsk

[Barry Nelson]

I am putting the image in IDE Master. I am able to access it using /i0 under NitrOS9, but HDBDOS does not see it. I did notice the vhd files did not show up in browse, but I was able to type in the file name. I did have to change the /i0 device descriptor to use FF60 and change the ice settings in VVC to match so that it did not conflict with EmuDisk if I wanted to use them both, but I set it back to FF50, and disabled EmuDisk and HDBDOS still does not see it.

> Bill Pierce ooogalapasooo at aol.com 
> Thu Nov 12 21:01:16 EST 2015
> 
> Barry, where are you putting the VHD? If you are putting it in "HD Drive 0", then you are not even using the SuperIDE. The SuperIDE'dll uses the "IDE Master" & "IDE Slave" slots, which will not (by default) even accept a VHD image, only "xxx.img" files. Not sure, but I think CF cards use FAT16 or FAT32 (I could be wrong, they may use just files like VHDs) where VHD files are just a 'file'.|
> If you are putting it in "HD Drive 0", then EmuDsk is using it in NitrOS9, not SuperIDE. You're not going to access those drives in NitrOS9 without rbsuper, llide, i0, and i1 installed.
> And hdblda will not access the "HD Drive 0" slot from RSDOS, it is looking for "xxxx.img" to be in "IDE Master".