[Coco] Kipper SBC v1 Update

[Kip Koon]

Hi Jim,
It should be easy enough to interface.  I could not find any pin out for this particular item.  Do you have any clue?

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon



> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of RETRO Innovations
> Sent: Saturday, March 14, 2015 5:29 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Kipper SBC v1 Update
> 
> On 3/14/2015 4:15 PM, Kip Koon wrote:
> > Hi Joe,
> > I've got a friend going over the design now.  I will see if the 5 pin header for a TTL - USB cable is easy to add.  I need to get a pin out
> for the TTL end of the cable or find one with separate female headers on each wire.
> Is this what you are talking about:
> 
> http://www.ebay.com/itm/USB-To-RS232-TTL-PL2303HX-Auto-Converter-Module-Converter-Adapter-For-arduino-
> /251876195815?_trksid=p2054897.l4275
> 
> These things are so cheap, I am thinking you should just not populate the RS232 and the MAX and the caps and just wire this in to the
> base board, as this is extremely cheap...
> 
> Jim
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco