[Coco] 6 Chip ^809 Computer -> Kipper SBC

Joe Grubbs jsgrubbs at hotmail.com
Thu Mar 12 09:32:51 EDT 2015


You're a mad scientist Kip! (in a good way). I can't wait to find out what the final product will look like. I'm itching to build a minimal 6809 machine!



> From: computerdoc at sc.rr.com
> To: coco at maltedmedia.com
> Date: Thu, 12 Mar 2015 03:08:38 -0400
> Subject: Re: [Coco] 6 Chip ^809 Computer -> Kipper SBC
> 
> Hi Joe, 
> Since the Terminal/Keyboard has a serial TTL interface to the host computer, it would need the MAX232 chip and the DB9 female connector in order to be able to physically connect to the Kipper SBC's RS-232 Serial Interface.  I can design it up that way.  It could be quite handy in that form.  It could then be used to plug up to any RS-232 serial based SBC project.  In the interest of time and maybe cost, the TTL to USB cable has advantages.  It seems if memory serves that Grant has attached to the USB to TTL interface cable method some type of warning.  I need to revisit the web page to see.  Yes, the USB to TTL cable could indeed power the Kipper SBC if all total the MAXIMUM current draw is 500mA.  I am putting a DC input jack on the Kipper SBC to have an alternate power method.
> 
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> 

 		 	   		  


More information about the Coco mailing list