[Coco] tandy 1000 ex/hx external 720k drive to use on coco

Josh Harper allencoco at yahoo.com
Sat Jun 20 03:35:05 EDT 2015


what I have is  the tandy 1000 single external 720k drive in its original case with a new ribbon cable that plugs into the coco disk controller
the I have a 4 pin small connector pluged in to the drive that has a 4 pin larger power connector on other end
all I need now is a power supply that powers standard  cd/dvd/hdd that will plug into my  power connector
is this correct
will the following work,  looks like it has astandard hdd,cd,dvd  power connector
http://www.ebay.com/itm/AC-100V-240V-to-DC-12V-5V-2-5A-Power-Supply-Adapter-HDD-HARD-DISK-DRIVE-IDE-/121477474087?pt=LH_DefaultDomain_0&hash=item1c489f2727
thanks  guys
       From: George Ramsower <georgera at gvtc.com>
 To: coco at maltedmedia.com 
 Sent: Saturday, June 20, 2015 12:16 AM
 Subject: Re: [Coco] tandy 1000 ex/hx external 720k drive to use on coco
   
  The last PSU I used was from an old VCR. It is a switching PSU and had 
5V and 12V. It handles the CC3 board, 3.5" floppy drive and add on 
boards but I did have to add a 12V lamp to the 5V supply line to keep 
the current drain to a level that keeps the PSU happy.
  I don't know how easy it is to find old VCRs now but, when I got this 
one, those things were constantly being tossed and replaced with new 
ones. That one is about half the width of a 5 /14 drive and about the 
same thickness and length.

George R





-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


  


More information about the Coco mailing list