[Coco] Will Cloud-9 Super IDE work with SDC?

Mark Marlette mmarlette at frontiernet.net
Tue Jul 14 15:53:38 EDT 2015


      From: Richard E. Crislip <rcrislip at neo.rr.com>
 To: coco at maltedmedia.com 
 Sent: Tuesday, July 14, 2015 2:06 PM
 Subject: Re: [Coco] Will Cloud-9 Super IDE work with SDC?
   
On Tue, 14 Jul 2015 16:15:00 +0000 (UTC)
Mark Marlette <mmarlette at frontiernet.net> wrote:

> Richard,
> With many hundred sIDEs sold, only two failed, both had the same
> problem. Blown CPLD. This can only happen if the cart is moved or
> inserted/removed with power on. Yours was like this once. The other
> times you have sent it in, it  was nothing more than you flashing a
> version of HDB-DOS in to it and no longer being able to access your
> files do to the offset was zero and not the standard offset of the
> distribution.
> 
> I see no reason why the two can't coexist together, like someone has
> already mentioned, the address selection must be different.With that
> said, I do not own a SDC. Regards, Mark Marlette
> http://www.cloud9tech.com
> mark at cloud9tech.com
> 
>      From: Richard E. Crislip <rcrislip at neo.rr.com>
>  To: coco at maltedmedia.com 
>  Sent: Monday, July 13, 2015 10:19 PM
>  Subject: Re: [Coco] Will Cloud-9 Super IDE work with SDC?
>    
> On Mon, 13 Jul 2015 19:51:35 +0000
> Chester A Patterson <vchester at setec-cr.com> wrote:
> 
> > Will the Cloud 9 Super IDE work OK with the SDC?
> > My guess that it depends which slot in the MPI they are and which
> > slot is selected (MPI switch) upon power up.
> > 
> > Thanks.
> > 
> > Chester
> > Costa Rica
> > 
> > 
> 
> Mark will correct me if I am wrong, but I trashed my SuperIDE trying
> to run them together. It could be I had them in the wrong MPI slots,
> or I did soemthing else, but be careful.  Mark???
> 

Thanks Mark. All I can say is never intentionally did any of that 8-/.
Wish I knew what I did to cause all this heartburn <sigh>. I am NOT an
experimenter. I don't even know how to make a Nitros boot disk, but
that will change.

Cordially

 Richard,
Not a big deal at all, the problem is you can reflash in a matter of seconds. Just as long as you didn't write to the CF with the wrong offset, the CF's FS will be intact.
Regards,

Mark Marlettehttp://www.cloud9tech.com
mark at cloud9tech.com



-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


  


More information about the Coco mailing list