[Coco] NitrOS-9 L2 on coco3 128k, with CocoSDC

Bill Pierce ooogalapasooo at aol.com
Sun Feb 22 01:01:44 EST 2015


Are you actually using DW? If so, the serial port is already in use by DW and DW4 already has terminal support bui8lt in, just type:
shell i=/z1 (no baud setting or anything, leave at default)
and a terminal window will open on your PC.
This is assuming the "rbdw", "dwio" &"scdwv" drivers plus "/z1" (/z2-/z7 opt) descriptors are in your boot.
From there, you can do most things you normally do from the cmd line EXCEPT any program/module requiring graphics.

I don't remember the command for using T1.. it's been a long time since I needed to do that :-)
 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: embsys dev <embsysdev at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Sun, Feb 22, 2015 12:05 am
Subject: Re: [Coco] NitrOS-9 L2 on coco3 128k, with CocoSDC


Add'l info: the DSK I'm booting is:
nos96809l2v030300coco3_cocosdc.dsk




On Sat, Feb 21, 2015 at 9:55 PM, embsys dev <embsysdev at gmail.com> wrote:

> Noob questions, sorry....no experience with OS9.
>
> I found a DSK for NitrOS-9 L2 with CocoSDC support, copied it to SD card,
> and I can boot it, but it comes up in 80 columns, which is unreadable on
> composite output.  I've googled quite a bit about how to set 40 or 32
> columns, and it looks like there's multiple ways, but you've got to have a
> usable OS9 system to do it.  Can't read the screen, so stuck.
>
> Initially I was able to blindly type in the command to set the W1 window -
> once- , but can't seem to repeat this.  Seems like some setting on disk got
> changed that makes it fail. Can't read the error, sorry.  I'll try
> recopying the .DSK to SD Card.
>
> Additionally, I would like to redirect the OS9 shell to a terminal prog
> running on the PC.  Neither "shell = -1/t1&"  nor "shell <>>>/t1 &"
>  works.  Tried 9600, 38400, 57600, and 115200, no joy.   I'm guessing maybe
> DW support in CocoSDC firmware makes the serial port invisible to OS9?
>
> 1. How do I modify the OS9 DSK to boot to 40 column white on black? It
> would be awesome if somebody could give me a modified DSK.
> 2. How to redirect os9 shell to serial?
> 3. is there a step-by-step how-to on building OS9 DSK images on the PC?
>
> Thanks,
> Darryl
>
>
>

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


 


More information about the Coco mailing list