[Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

Zippster zippster278 at gmail.com
Tue Feb 17 19:04:32 EST 2015


Kip,

I have a couple extra of the RGB2VGA boards from my OSHPark order (I only need 1).
I can recoup some of my cost and you can build one for Richard without having to buy a whole batch.

There’s only one version, right?

- Ed


> On Feb 17, 2015, at 5:45 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
> 
> Hi Richard,
> I still have one unpaid order, so if he ends up not committing in a few days, then you may have his spot, otherwise you will be the first order of the next group of 3.  I would say who ever pays first gets the spot.  $45 for the RGB2VGA Converter plus $6 shipping gets the spot.  Who will win this little race.  :)  I look forward to building your PCB.  Thank you for your interest in sending a fellow CoCoNut to this year's CoCoFEST.
> 
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> 
> 
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Richard E Crislip
> Sent: Tuesday, February 17, 2015 10:25 AM
> To: coco at maltedmedia.com
> Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign
> 
> On Sat, 14 Feb 2015 16:53:07 -0500
> "Kip Koon" <computerdoc at sc.rr.com> wrote:
> 
>> HI Joe,
>> Yes, the RGB2VGA converter is for the 9 pin RGB male header on the 
>> bottom of the Coco 3.  The converter also has and input and output VGA 
>> style 15 pin connectors.  It converts the old 15KHZ video signals from 
>> all computers to the current 31KHZ video signals.  Luis has 
>> successfully used it with several different retro computer systems.
>> And yes, from what I have seen in his videos, the picture looks very 
>> sharp.  I'm looking forward to eventually building one for myself, but 
>> that is a little bit in the future of course.  :)  Check the following 
>> link from Luis' web site.
>> https://sites.google.com/site/tandycocoloco/rgb2vga It has all the 
>> minute details about the RGB2VGA converter.  Luis thoroughly explains 
>> the entire operation of the RGB2VGA Converter which includes pictures 
>> of the PCB mounted on top of the Altera DE-0 Nano board.  It's a nice 
>> small package.
>> 
>> Kip Koon
>> computerdoc at sc.rr.com
>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>> 
>> 
>> -----Original Message-----
>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Joe 
>> Grubbs Sent: Saturday, February 14, 2015 11:07 AM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut 
>> To This Year's CoCoFEST" Campaign
>> 
>> Kip,
>> 
>> I need a refresher... The RGB2VGA converter is for the CoCo3, correct? 
>> I assume it adapts the connector under the CoCo to a DB15 for use with 
>> a VGA monitor? What's the general consensus on the performance? Does 
>> it work well with modern LCD monitors? Also, what is the cost?
>> 
>> 
>> 
>>> From: computerdoc at sc.rr.com
>>> To: coco at maltedmedia.com
>>> Date: Sat, 14 Feb 2015 02:34:16 -0500
>>> Subject: [Coco] Current Status of the "Help Send A Fellow CoCoNut
>>> To This	Year's CoCoFEST" Campaign
>>> 
>>> Hi Everyone,
>>> 
>>> First of all, much thanks goes out to all those who have already 
>>> ordered either the RGB2VGA Converter or the Wodpak2+ or both fully 
>>> assembled PCBs. Every order will certainly help send a fellow 
>>> CoCoNut to this year's CoCoFEST - namely me!  :P  I do appreciate 
>>> everyone who has participated so far.
>>> 
>>> I will be finalizing the PCB order with the fabrication house in the 
>>> next day or the day two, so if any of you who are interested but 
>>> have not yet ordered, please do so as soon as possible.
>>> 
>>> So far I have paid orders for 3 RGB2VGA Converters and 3 WordPak2+ 
>>> fully assembled PCBs.  Thank you again for all who have ordered thus 
>>> far.  I'm sending in the PCB designs in tonight and will do the 
>>> final order probably Monday.  I was going to ordering from a Chinese 
>>> PCB Fabrication house, but they are having their New Year's Day 
>>> celebrations this month, so I'm going with my original plan to use 
>>> OSHPark.  After the PCBs' order is done Monday, I should have the 
>>> finished PCBs back in about 10 days.  By then, the parts orders 
>>> should be about ready to arrive as I will put together the finalized 
>>> orders for parts Monday and sending in those orders as well.
>>> 
>>> I'm delighted to put these PCBs together for you guys or should I 
>>> say for Y'all!  :)  To correctly pronounce Y'all, it should be held 
>>> out approximately 1 to 2 seconds.  :P  Thank you all again.  Take 
>>> care my friends.
>>> 
>>> 
>>> 
>>> Kip Koon
>>> 
>>> <mailto:computerdoc at sc.rr.com> computerdoc at sc.rr.com
>>> 
>>> <http://www.cocopedia.com/wiki/index.php/Kip_Koon>
>>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 		 	   		  
>> 
> 
> Is it too late to order a RGB2VGA converter? If not, I'd like to order one. TIA
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



More information about the Coco mailing list