[Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

[Bill Loguidice]

I got the cable from Cloud-9 (that's as technical as I got). I did need to
change the gender for one of my 1084S's, though (easy enough with a cheap
adapter), and for one of the other ones I had to use the C-128 to 1084S
cable (square to round connector) to make it fit. Otherwise, it worked
perfectly and is preferred to using the CM-8 because both composite and RGB
can be connected at the same time.

-Bill

===================================================
Bill Loguidice, Managing Director; Armchair Arcade, Inc.
<http://www.armchairarcade.com>
===================================================
Authored Books
<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1> and
Film <http://www.armchairarcade.com/film>; About me and other ways to get
in touch <http://about.me/billloguidice>
===================================================

On Sat, Feb 14, 2015 at 10:06 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Bill,
> Do you have a wiring diagram I can have a copy of so I can make a CoCo 3
> RGB 10-pin output to the 1084S RGB input?  Heck, the pin out for all the
> inputs - other than the RCA jacks of course.  Those are a no-brainer.  :P
>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>
>