[Coco] VCC Released To Open Source Project !!!

Thu Aug 27 11:04:56 EDT 2015

Brett, I was talking about the hdbdos.rom that Aaron tried to install in the the becker.dll. It will not auto boot if the MPI is set to that slot, it crashes. It still has to be loaded externally or renamed "disk11.rom".

Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
Global Moderator for TRS-80/Tandy Color Computer Forums
http://www.tandycoco.com/forum/

E-Mail: ooogalapasooo at aol.com

-----Original Message-----
From: Brett Gordon <beretta42 at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Thu, Aug 27, 2015 10:44 am
Subject: Re: [Coco] VCC Released To Open Source Project !!!

lol... just emailed Aaron, about this.  I didn't realize the old Vcc's
HDBDOS
rom is broken?  Ok.. David Ladd was the other dude working on that.
I'll have to
prod him on IRC :)

I'm drooling for a Linux port.

On Thu, Aug 27, 2015 at 9:15
AM, Bill Pierce via Coco <coco at maltedmedia.com>
wrote:

> Brett, Aaron was
working on the Becker Port a while back and developed
> another version in which
uses a "cart" dll like all the conrollers. It
> actually works, but the "built
in hdbdos rom" doesn't. This allows the
> addition of the becker port to any
version of VCC just by inserting the
> cart dll.
> This should be up soon.
>
>
@Aaron Wolfe & David Ladd, Joseph asked if you guys would send him the
> Becker
Port stuff, he said he would work it into the new release
>
>
>
>
>
>
> Bill
Pierce
> "Charlie stole the handle, and the train it won't stop going, no way
to
> slow down!" - Ian Anderson - Jethro Tull
>
>
>
> My Music from the
Tandy/Radio Shack Color Computer 2 & 3
>
https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for
CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> Global Moderator
for TRS-80/Tandy Color Computer Forums
> http://www.tandycoco.com/forum/
>
>
E-Mail: ooogalapasooo at aol.com
>
>
>
>
>
>
> -----Original Message-----
> From:
Brett Gordon <beretta42 at gmail.com>
> To: CoCoList for Color Computer Enthusiasts
<coco at maltedmedia.com>
> Sent: Thu, Aug 27, 2015 9:09 am
> Subject: Re: [Coco]
VCC Released To Open Source Project !!!
>
>
> Huzzah Everybody!  Vcc is Open
Source!
>
> Now from an initial review of the code,
> it looks like some of the
new stuff
> that Aaron (and others?)  hacked into it
> (like becker drivewire )
is not
> present.  Yeah, definately need this repo set up
> properly.  That way
we can
> start goofing around.
>
>
> On Thu, Aug 27, 2015 at 9:01
> AM, Bill
Pierce via Coco <coco at maltedmedia.com>
> wrote:
>
> > I don't think Joe
>
understands how SF works... He hasn't been active for
> > quite some time. We
hope
> to set up a "real" repository soon. The code was
> > released to open
source under
> GPLv3 which pretty much allows total freedom,
> > so this could
be done.
> > I am
> going to try and get up with him first to find out if he is
going to
> > be active
> in the project and his intentions for Vcc.
> >
> >
>
>
> >
> >
> >
> > Bill Pierce
> > "Charlie
> stole the handle, and the train it
won't stop going, no way to
> > slow down!" -
> Ian Anderson - Jethro Tull
> >
>
>
> >
> > My Music from the Tandy/Radio Shack Color
> Computer 2 & 3
> >
https://sites.google.com/site/dabarnstudio/
> > Co-Contributor,
> Co-Editor for
CocoPedia
> > http://www.cocopedia.com/wiki/index.php/Main_Page
> >
> Global
Moderator for TRS-80/Tandy Color Computer Forums
> >
>
http://www.tandycoco.com/forum/
> >
> > E-Mail: ooogalapasooo at aol.com
> >
> >
>
>
> >
> >
> >
> >
> -----Original Message-----
> > From: Jens
<CoCoList at jensdiemer.de>
> > To: coco
> <coco at maltedmedia.com>
> > Sent: Thu,
Aug 27, 2015 8:21 am
> > Subject: Re: [Coco]
> VCC Released To Open Source
Project !!!
> >
> >
> > Am 27.08.2015 um 05:55 schrieb
> Bill Pierce via Coco:
>
> > After all the discussion
> > of releasing VCC to an open
> source project, I
logged in to Brians
> > tandycoco.com
> > forum today and low and
> behold,
Joseph Forgeone (original Vcc author) had
> > signed
> > in and posted that
> he
had uploaded his new Vcc 2.00 and it's sources to
> > Source
> > Forge.
> > >
>
> >
> https://sourceforge.net/projects/vcce/
> > >
> > > There are binaries as
well
> > as
> sources.
> >
> > Wow. There has somebody misunderstood how the
sf.net download
> area
> > works:
> >
> > All files should be packed into one
archive file.
> >
> > There is
> IMHO no way
> > to download a couple of files
directly.
> >
> >
> > --
> >
> >
> > Mfg.
> >
> >
> Jens
> > Diemer
> >
> >
> >
----
> > http://www.jensdiemer.de
> >
> > --
> > Coco mailing
> >
> list
> >
Coco at maltedmedia.com
> >
> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
> >
> >
> > --
> > Coco mailing
> list
> > Coco at maltedmedia.com
> >
>
https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
>
>
> --
> Brett M.
>
Gordon,
> beretta42 at gmail.com
>
> --
> Coco mailing
> list
>
Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>
>
--
> Coco mailing list
> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco
>

-- 
Brett M.
Gordon,
beretta42 at gmail.com

-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco