[Coco] Fuzix

[Kip Koon]

Hi Mathieu,
That sounds interesting too.  I'll be watching with much interest for your progress on both fronts.  :)  

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon



> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Mathieu Chouinard
> Sent: Wednesday, April 08, 2015 7:51 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Fuzix
> 
> Kip, I would love to be able to build a multicomp out of a de0-nano but my understanding of vhdl (fpga) is minimal as of today. But this
> might be a nice learning project ... Will be a change from embedded mips, arm and powerpc I have to deal with at work ;-) On Apr 8,
> 2015 7:36 PM, "Kip Koon" <computerdoc at sc.rr.com> wrote:
> 
> > Hi Mathieu,
> > That would be great!  I have a 6809 Multicomp running Cubix now that I
> > will be showing at the CoCoFEST.  I'll be happy to do any testing you
> > need.  Please keep me informed on your progress of porting Fuzix to
> > the Multicomp.  Check the N8VEM email list as there is some Fuzix
> > development going on for the ECB 6x0x SBC VME ATX PCB Eurocard 6U
> > format - 100mm x 160mm.  All the files for the Multicomp are found in
> > the FPGA Emulation folder on the N8VEM web site.  The link is here.
> > <
> > http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=FPGA%20em
> > ulation
> > >
> > The Multicomp Bare PCB can be bought here for $16.
> > < http://www.smarthome.jigsy.com/fpga>
> > The 6x0x SBC VME ATX 6U PCB files are here.
> > There is a lot of information to absorb, but basically the Multicomp
> > PCB is a pretty simple build.  The picture shows the typical configuration.
> > There is further development going on using a Cyclone IV EP4E6 FPGA
> > development board by James Moxham and Max Scane on the N8VEM email list.
> > <
> > http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=ECB%206x0
> > x-ATX-6U
> > >
> > Check the inventory page for current availability here.
> > < http://n8vem-sbc.pbworks.com/w/page/35044530/PCB%20Inventory>
> > The 6x0x build is quite another story but very rewarding once you get
> > it going!  :)  Have Fun!
> >
> > Kip Koon
> > computerdoc at sc.rr.com
> > http://www.cocopedia.com/wiki/index.php/Kip_Koon
> >
> >
> >
> > > -----Original Message-----
> > > From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of
> > > Mathieu
> > Chouinard
> > > Sent: Wednesday, April 08, 2015 6:22 PM
> > > To: CoCoList for Color Computer Enthusiasts
> > > Subject: [Coco] Fuzix
> > >
> > > Hi,
> > > I was wondering if anyone tried this
> > > https://github.com/EtchedPixels/FUZIX
> > >
> > > I was thinking of porting it to the multicomp or the 6 chip computer
> > >
> > > Mathieu
> > >
> > > --
> > > Coco mailing list
> > > Coco at maltedmedia.com
> > > https://pairlist5.pair.net/mailman/listinfo/coco
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco