[Coco] CoCo 2/3 and MPI Locking plate

[tim lindner]

On Thu, Oct 16, 2014 at 1:50 PM, Nick Marentes <nickma2 at optusnet.com.au> wrote:
> My locking plate (as was the one sold in the 80's) is much smaller than
> Tim's locking only the 2 right hand CoCo feet with the 2 left hand MPI feet.

When all eight feet are captured I would think an 1/8 inch of material
is plenty. In fact, the paper templates I made are 0.02 inches thick
and are surprisingly effective.


-- 
tim lindner