[Coco] CocoSDC

Zippster zippster278 at gmail.com
Sat Oct 11 13:07:12 EDT 2014


The SD Modules are included in the "full kits" in case anyone was wondering that.

- Ed


On Oct 11, 2014, at 11:35 AM, Darren A <mechacoco at gmail.com> wrote:

> On Sat, Oct 11, 2014 at 7:33 AM, Zippster <zippster278 at gmail.com> wrote:
> 
>> Yes.  Here it is with Mouser part numbers.
>> 
>> - Ed
>> 
>> 
>> On Oct 11, 2014, at 8:19 AM, Louis Ciotti <lciotti1 at gmail.com> wrote:
>> 
>>> For those of us not getting a full kit, will you provide  BOM for the
>>> remaining items we have to get on our own?
>>> 
>> 
>> 
> In addition to the parts listed in that file, you also need one of these
> widely available SD Card modules:
> 
> <http://ebayitem.com/271434917676>
> 
> When assembling the board, I recommend you place a piece of foam tape
> between the SD card socket and the board. This is to lift the module
> slightly so that the header pins don't protrude too far past the bottom of
> the board which can otherwise cause it to not rest properly inside an
> FD-502 case.
> 
> Darren
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



More information about the Coco mailing list