[Coco] Coco Cartridge Prototyping Pak PCB

Kip Koon computerdoc at sc.rr.com
Thu Oct 9 01:01:12 EDT 2014


Hi Guys!
Here is the second version of the Coco Cartridge Prototyping Pak with all
your suggestions.  How did I do Ed?  Not only have I included the links to
the renderings from OSHPark, but I have also included the Schematic and PCB
layout in PDF form since so many people are expressing an interest in this
project and have made suggestions.
The following links are the top and bottom renderings of the PCB from
OSHPark.
https://www.dropbox.com/s/yy17jwamkejx94s/Coco%20Cartridge%20Prototyping%20P
ak%20-%20Top.png?dl=0
https://www.dropbox.com/s/euo6vq5ukkr8gvu/Coco%20Cartridge%20Prototyping%20P
ak%20-%20Bottom.png?dl=0
Here are the links to the schematics and the PCB layout.  The first
schematic has all the decode logic.  All the second schematic has are the
holes.  The third link of course is the PCB layout from Eagle Pro. V6.4.0.
https://www.dropbox.com/s/amvqf8nf5xfvznl/Coco%20Cartridge%20Prototyping%20P
ak%20sch%201.pdf?dl=0
https://www.dropbox.com/s/pu3o328c8aolm9d/Coco%20Cartridge%20Prototyping%20P
ak%20sch%202.pdf?dl=0
https://www.dropbox.com/s/0736lzhlvs7w1of/Coco%20Cartridge%20Prototyping%20P
ak%20brd.pdf?dl=0
Thank you Ed for offering to help.  It was late when I got back on, so I
went ahead and tried my hand at some clean up.  
If I missed someone's suggestion.  It was not intentional.  Please continue
to inspect my work and let me know what you think?  I appreciate all your
suggestions.  It helps me to make a better PCB.  Thanks a bunch!  Have Fun
Guys!

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon
http://computerpcdoc.com/


-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of rcrislip
Sent: Wednesday, October 08, 2014 11:49 PM
To: coco at maltedmedia.com
Subject: Re: [Coco] Coco Cartridge Prototyping Pak PCB

On Wed, 08 Oct 2014 20:38:55 -0500
Brian Goers <briang0671 at sbcglobal.net> wrote:

> On 10/8/2014 5:20 PM, Kip Koon wrote:
> > Hi Everybody!
> >
> > The Coco Cartridge Prototyping Pak PCB is designed and ready for 
> > scrutinizing.  I'd like to get a few interested people to examine 
> > the schematic and make sure I have done my homework correctly.
> On the top drawing. I see an outline around two holes, are the two 
> holes connected.
>      I would like to have at least 3 holes connected.
> 
> The outline pattern changes to the right of the decoding section, it's 
> one row down.
> The outlines do not line up from the left to right across the board.
> 
> Can numbers be put on the board to help layout/ locate positions?
> 
> How big is this board?
> 
> 
>   
> 
> Kip Koon
> 
> 

OK <ignorance switch on>

I am not sure what the silk screening critiques are about. IS that referring
to the printing over some of the holes? To my untrained eyes, it looks good.
TIA

<ignorance switch off>


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco



More information about the Coco mailing list