[Coco] CocoSDC booting OS9

Brett Gordon beretta42 at gmail.com
Tue Nov 18 11:14:04 EST 2014


See inlines, below

On Tue, Nov 18, 2014 at 9:49 AM, Bill Pierce via Coco
<coco at maltedmedia.com> wrote:
>
> I run all my systems (real and emuled) the way Robert describes. Even my starter kits are set up this way (I modded the roms with the offset).
>  I have been complaining for almost 4 years now that a 2nd set of hdbdos roms needs to be generated with the ofset at $5A000 and got nothing but flack. Now it's slowly coming back on everyone :-)

Cool... its nice to know there is some sort of standard HDB offset.

> Even the stock Vcc 1.4.2 and it's accompanying vhd (which needs to be updated to NOS9 v3.3.0) is set like this. This is s atandard set by Alan deKok when he developed the emudsk driver for the Coco emulators.
> SuperIDE uses a different offset, and needs to be sat different. It's the only odd case I know of.

I have a SuperIDE, and with the development of CoCoBoot, I know I have
it set to stock, and have set it a million times to:  0x52ddc .  This
seems to be another more-or-less standard.  Of course to modernize the
two systems,  Disks should probably have a actual on-disk (meta)
partition table... PC's have had partition tables for 40 years... why
don't we?


> If the roms could become available with the offset, then a copy of Robert's RGBDOS/HDBDOS Tools disk needs to accompany the roms as they allow you to use the auto boot feature to boot straight into OS9 or RSDOS.

I'll have to check out Roberts utilites they sound fun!


>
>
> Bill Pierce
> "Today is a good day... I woke up" - Ritchie Havens
>
>
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Webmaster of The TRS-80 Color Computer Archive
> http://www.colorcomputerarchive.com/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> E-Mail: ooogalapasooo at aol.com
>
>
>
>
> -----Original Message-----
> From: Robert Gault <robert.gault at att.net>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Tue, Nov 18, 2014 8:52 am
> Subject: Re: [Coco] CocoSDC booting OS9
>
>
> Brett Gordon wrote:
>><snip>
>> Usually, I think most user partition there HD's with OS9 at the beginning,
>> and HDBDOS *after* it.  With Boisey's Super Driver for OS9 you can
>> partition the drive the other way around with HDBDOS drives taking the
>> lower partition and OS9 the higher. If you format your HD this way, then
>> you have the ability to create a bootdisk that is readable from HDBDOS (and
>> the DOS command) solve the Bob's proposed dillema.
>>
>><snip>
>
> Maybe you can place the Basic portion first and OS-9 last with the Super Driver
> but that would NOT be good. Further there is no reason to do that with HDBDOS.
>
> RGBDOS and HDBDOS start in Disk Basic mode and read Basic disks based on the
> offset at $D938-$D93A in the Disk ROM. If you want just Disk Basic then the
> offset (stock I believe for HDBDOS) is $000000. The default for the emulators
> JVC, MESS, and VCC is $5A000.
> You can backup a 35-track single sided NitrOS-9 disk to any of 256 drives after
> the $5A000 break and boot into NitrOS-9 from that disk. It just requires the
> correct Boot module and the program LINK.BAS to correctly set LSN0 in the
> NitrOS-9 portion of the .vhd drive.
> There should not be any reason why the SDC can't work this way and be compatible
>
> with all other Coco installations including real hard drives with RGBDOS.
> Also, if you don't like Disk Basic, you can have HDBDOS automatically boot into
> NitrOS-9 on startup with the use of only 1 or 2 Disk Basic "drives" on the hard
> disk.
>
> With real hard drives, the offset is set by the user based on the size of the
> drive and the desire or lack of it for OS-9 or Disk Basic. The original code
> RGBDOS was written when drives were small; not like todays monsters. :)
>
> Robert
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



-- 
Brett M. Gordon,
beretta42 at gmail.com


More information about the Coco mailing list