[Coco] I think now I have a final design

[Luis Antoniosi (CoCoDemus)]

That's because Eagle is stupid and draw crosshairs on top of it. Should be
more visible on final board.

B.O.M:

3x 75Ohms 1%
8x 1K Ohms 5%
6x 2K Ohms 5%
2x 510 Ohms 5%
1x 820 Ohms 5%
1x 390 Ohms 5%
2x 82 Ohms 5%
1x 680K Ohms 5%
1x Trimmer 30K Ohms

2x Ceramic Cap 104
2x 20x2 Stackable Header Female
1x 5x2 Header
2x DSub-15 female
1x Cinch connector
1x Dip Switch 8 Positions
1x DIP-8 socket
1x LM1881 IC
3x Jumper pins




Luis Felipe Antoniosi



On Tue, Nov 4, 2014 at 5:23 PM, Steven Hirsch <snhirsch at gmail.com> wrote:

> It's very hard to make out the parts values.  Contrast is not good on the
> layout and the numbers are shifted over the lines on the schematic.
>
> I _think_ I have all of them except for R7.  Is that 890 or 390?
>
> If you can extract a bill-of-materials, that would be helpful.
>
> Steve
>
>
> --
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>