[Coco] Coco [OT] Circuit Prototyping

John W. Linville linville at tuxdriver.com
Tue Jul 22 17:27:21 EDT 2014


FWIW, I recently had Mark's design manufactured through Hackvana
as well.  They have a variety of options that might make them more
attractive if the gold plating is not a priority for you.  I have
the boards in hand and they look good, but I haven't had a chance to
populate and use them yet.

John

On Tue, Jul 22, 2014 at 01:48:53PM -0500, Zippster wrote:
> Hi guys,
> 
> I’m new to the list.  OSH Park is handy, though definitely expensive for larger boards, I’ve used them a lot.
> BTW Mark, I’ve ordered and used your CoCo EPROM pak boards from OSH Park, thanks for the shared
> project.  
> 
> I’ll have to check out Elecrow, haven’t heard of them before.
> 
> Ed
> 
> 
> On Jul 22, 2014, at 10:14 AM, Mark J. Blair <nf6x at nf6x.net> wrote:
> 
> > 
> > On Jul 22, 2014, at 06:18 , Steve <6809er at srbsoftware.com> wrote:
> >> Like you, I'll use breadboards for early design and testing.  But even for my early prototypes, I still use PC boards.
> >> 
> >> Elecrow.com has 2 Layer 10 * 10 cm PC boards for $11.90.  That's not just one board but five of them. Give them your Eagle CAM file and wait about two - three weeks for the low cost shipping ($4.77) option.  ($25 in shipping, you will get it about a week.)  They are complete boards with solder mask, silk screen printing and holes drilled.
> > 
> > 
> > Recently, I've been using OSH Park for my small-quantity, small-size PCBs: https://oshpark.com
> > 
> > Unlike many other prototype PCB houses, they offer ENIG (gold plating) as their standard surface finish, which is nice for card edge contacts. 2-layer board pricing is $5 per square inch for 3 boards, with free shipping and no setup fee. That gets expensive for a larger board; I might not use them if I ever make a QBUS board for my PDP-11! But it's nice and cheap for small boards such as my CoCo EPROM Pak.
> > 
> > They also provide a neat feature for those of us who like open-source hardware: After uploading board files, you can optionally choose to share the project so that anybody can easily order its PCBs directly from OSH Park. For example, here are the projects I've shared so far:
> > 
> > https://oshpark.com/profiles/NF6X
> > 
> > 
> > 
> > -- 
> > Mark J. Blair, NF6X <nf6x at nf6x.net>
> > http://www.nf6x.net/
> > 
> > 
> > -- 
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.


More information about the Coco mailing list