[Coco] Glenside IDE problem

Bill Pierce ooogalapasooo at aol.com
Wed Dec 10 21:42:31 EST 2014


The 4 gig IDE partition just finished formatting.... 10 hours!!!
The next one will be started at bedtime... LOL
free /i0
4,260,800 free sectors, largest block 4,260,800 sectors


Which programs use 1 sector clusters? I know "B&B File System Repack" does, someone said something about EZGen, does it use 1 sector clusters? Any others anyone knows of?


Now to fill it up...... :-)
 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: Bill Pierce via Coco <coco at maltedmedia.com>
To: coco <coco at maltedmedia.com>
Sent: Wed, Dec 10, 2014 8:49 pm
Subject: Re: [Coco] Glenside IDE problem



BTW,,,, how many "days" will it take this 4g to format?
LMAO
 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: L. Curtis Boyle <curtisboyle at sasktel.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Wed, Dec 10, 2014 8:44 pm
Subject: Re: [Coco] Glenside IDE problem


I presume the new one is similar to my original driver. OS-9 can handle 128 MB 
max if you use a cluster size of 1 sector (256 bytes/sector). If you increase 
the cluster size, you can get up to 4 GB (although, some software was hardcoded 
for 1 sector clusters, so you need to be careful about what utilities you run). 
If you add partitions to the mix, you can make several of up to 4 GB each (I 
tested mine with 5 descriptors of 4GB each on a 10 GB Seagate drive when I wrote 

the original driver). The idea of using offsets (to point to the start of each 
partition) was taken from Bruce Isted’s driver from back in the Eliminator days.

L. Curtis Boyle
curtisboyle at sasktel.net



> On Dec 10, 2014, at 7:35 PM, Bill Pierce via Coco <coco at maltedmedia.com> 
wrote:
> 
> 
> From what I read, it's 4g at a time... per partition. It's all the tables can 
hold, but a separate table for each partition.... I may be wrong... but that's 
the way the spec for the ide explained it. You eventually run out of room for 
tables, but this is an experiment, so who cares. I'll just do it again until I 
find something I like.
> Besides... my Coco needed the exorcise, it was taking on a little weight while 

Vcc has been staying slim and trim.... :)
> 
> 
> 
> 
> Bill Pierce
> "Today is a good day... I woke up" - Ritchie Havens
> 
> 
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> E-Mail: ooogalapasooo at aol.com
> 
> 
> 
> 
> -----Original Message-----
> From: David Ladd <dladd at realmspire.com>
> To: Bill Pierce <ooogalapasooo at aol.com>; CoCoList for Color Computer 
Enthusiasts <coco at maltedmedia.com>
> Sent: Wed, Dec 10, 2014 8:27 pm
> Subject: Re: [Coco] Glenside IDE problem
> 
> 
> On Wed, Dec 10, 2014 at 7:23 PM, Bill Pierce via Coco
> <coco at maltedmedia.com> wrote:
>> 
>> David, it's the max that OS9 will do.... Why? because I don't see formating 
> 128meg and wasting 39.8 gig :-)
>> I'll eventually have 5 of these on this drive (not including RSDOS 
> partitions).
>> Why? this is my revenge for all those "Disk Full" errors all through the 
years 
> :-)
> 
> I thought the max that the CoCo could access total period was 4GByte
> with the way the addressing of the LSN was?  That is if I remember
> right.  Cause I had thought about buying a 8GB CF card, but saw that
> you couldn't access anything past the 4GByte boundary.  Please correct
> me if I am wrong on this.
> 
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
> 


-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


 

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


 


More information about the Coco mailing list