[Coco] Glenside IDE problem

[Cocodemus]

Is the jumper properly set? Ff50 or ff70? What does the descriptor say? 

Sent from my iPhone

> On Dec 9, 2014, at 11:45 PM, Bill Pierce via Coco <coco at maltedmedia.com> wrote:
> 
> 
> I just recently aquired a Glenside IDE board and I'm trying to set it up.
> From what I've read in the Super Driver manual, using rbsuper. llide, and the descriptors is "supposed" to be pretty much automatic.
> I know the board and drive are connected properly as I can run Curtis's old "detect_ide21.b09" util and it idents my drive with all the proper specs.
> I have installed rbsuper, llide, i0, and ih in my boot, all from a fresh repo build.
> Any access I try to make to /i0 gives me "Error 235: Bad Name"
> This includes format, dir, free ect. The only uitl that recognizes the drive is dmode which gives proper attr for /i0.
> This seems to be a descriptor error and not a drive error.
> I have checked header parity and crc for all files and everything shows good.
> Does anybody know what I must do to make these drivers work with my Glenside board?
> Is there something I need to change? I know the descriptor should be set specifically for my drive, but it should still give me a proper device error (244, 214, etc) and not "Error 235: Bad Name".
> 
> 
> Thanks :-)
> 
> 
> Bill Pierce
> "Today is a good day... I woke up" - Ritchie Havens
> 
> 
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> E-Mail: ooogalapasooo at aol.com
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco