[Coco] Need help (of course)

[Bill]

Does that same cable work with the 5 1/4" as Drive 0? A cable made like that causes both drives to light up when EITHER a DIR or DIR1 is issued

> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Kip Koon
> Sent: Friday, December 05, 2014 6:39 AM
> To: 'CoCoList for Color Computer Enthusiasts'
> Subject: Re: [Coco] Need help (of course)
>
> Hi Bill!
> I don't remember what I told you.  I forgot.  :P  Here is a link for the Floppy drive connector pin out.
> http://pinouts.ru/Storage/InternalDisk_pinout.shtml
> To swap Drive 0 with Drive 1, counting from pin 1 with the red strip, separate conductors 10-12 and flip them so 10 is where 
> 12 was and 12 is where 10 was.  Understand?
>>
>> -----Original Message-----
>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill
>> Sent: Thursday, December 04, 2014 12:02 PM
>> To: Coco Enthusiasts
>> Subject: [Coco] Need help (of course)
>>
>> I am trying to make a cable to hook up a 3.5" (80tk) and a 5 1/4" (35tk). 
>>
>> The 5 1/4" is originally out of an FD-501, and it has no jumper to set it as drive 1.
>>
>> How do I build the cable?