[Coco] Terminating resistors

[Mark J. Blair]

It could also be the wrong kind of resistor pack. There are many resistor pack configurations, such as independent resistors wired between opposite pins, all resistors sharing a common pin, all resistors sharing 2 common pins (so the pack can be inserted either way), and other more complicated networks. Using the wrong kind of pack could mess things up.

If I'm not mistaken, the FD-55BV wants a 14-pin pack with seven independent 300 ohm resistors connected between opposite pins. Can you check the pack you're trying to use with an ohm meter?

-- 
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/