[Coco] Are Glenside IDE board available

Mark Marlette mmarlette at frontiernet.net
Thu Sep 19 08:18:53 EDT 2013


All,

Since SuperDriver is now free, use it.

It supports the Glenside Adapter.

Regards,

Mark
http://www.cloud9tech.com



________________________________
 From: Christopher R. Hawks <chawks at dls.net>
To: coco at maltedmedia.com 
Sent: Thursday, September 19, 2013 6:27 AM
Subject: Re: [Coco] Are Glenside IDE board available
 

On Wed, 18 Sep 2013 23:21:53 -0400
Al Hartman <alhartman6 at optonline.net> wrote:

> I'm sorry, this is not clear...
> 
> You are saying you have built-up boards for $10.00 + shipping?
> 
> But, the supplied software doesn't work. Though, you can use HDBDOS
> or NitrOS9 instead?

    No, he meant the supplied software is difficult to configure.
You need to know the size of the drive (heads, cylinders, and tracks)
and understand how to build a device descriptor. (Just like the old
days.) OR, you can use RBSuper (and friends) from Nitros-9 (which asks
the drive for those parameters) and it just works. HDBDos
(with the correct offset) just works.

> And, you can add a connector to piggy-back a disk controller for
> $9.43? (I thought there was space for two connectors?)

    There IS space for two connectors. (And they cost about $10
each and you have to solder them to the board yourself.)

> Do I have this right?
> 
> Can you post a link to a picture of a
> board?

A quick Google reveals:
http://www.hat3.net/Home/ide-interface/pictures
(Picture that says "Glenside IDE Board based on my design"


Christopher R. Hawks
HAWKSoft
-- 
"Most people are born and years later die without really having lived
at all. They play it safe and tiptoe through life with no aspiration
other than to arrive at death safely."        -- Tony Campolo,
"Carpe Diem"

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


More information about the Coco mailing list