[Coco] Another rare brazilian coco clone...

[Daniel Campos]

Luis,

I not tested the pause function for an entire hour, but I think you can have it paused as long as you want.
The video freezes but its still visible all the time.

Regards,
Daniel

Sent from my IPhone

Em 28/01/2013, às 17:00, Luis Fernández <luis46coco at hotmail.com> escreveu:

> Let me rephrase the question
> 
> Is there a problem for pause the computer for an hour?
> It's like a reset, you only need to press a few moments?
> turns off the video generation, the duration of the pause, as the reset?
> 
>> To: coco at maltedmedia.com
>> From: denis.bisson2 at sympatico.ca
>> Date: Mon, 28 Jan 2013 18:14:01 +0000
>> Subject: Re: [Coco] Another rare brazilian coco clone...
>> 
>> Daniel Campos <daniel.campus at ...> writes:
>> 
>> ...
>>> In the place of the 3.9K and 3.3K resistors, I changed both for 10K 
>>> resistors. The 470 Ohms resistor I removed. In the place of the 560 Ohm 
>>> resistor I put a 1K trimpot for fine tunning. (1 POT HERE)
>>> On mine I also put two trimpots in pulldown on both B-Y and R-Y lines 
>>> that come from 6847 to 1372. (2 POT HERE)
>>  On the picture I saw 4 POT's. What about the fourth ones?
>> 
>>  For the B-Y and R-Y signal, you mean you simply add the potentiometer 
>> resistor to the ground to ad a load? Or you mean you add a potentiometer and 
>> signal is taken from the "wiper" of the potentiometer to be connectoed to the 
>> MC1372?
>> 
>>  Thanks.
>> 
>> Dennis.
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>                         
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco