[Coco] rebuild NitrOS9 with superIDE
Retro Canada
retrocanada76 at gmail.com
Mon Sep 24 13:28:58 EDT 2012
Hi, i'm talking about the virtual HDB-DOS disk present in my CF card,
not DW drives. How can I access the virtual hdb-dos disk 10 for
instance ?
dir /ih10
or what ?
Thxs,
Felipe
On Mon, Sep 24, 2012 at 1:19 PM, Bill Pierce <ooogalapasooo at aol.com> wrote:
>
> To make a new disk in DW, just right click the slot and select "Make A New Disk" OR you can just create a JVC disk in VCC and format it then mount it in DW. In HDBDOS, make sure any VHDs you use have the offset set properly and for virtual floppies, the offset is 0. In OS9 it doesn't matter.
>
> Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Bill Pierce
> ooogalapasooo at aol.com
>
>
>
>
> -----Original Message-----
> From: Retro Canada <retrocanada76 at gmail.com>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Mon, Sep 24, 2012 10:17 am
> Subject: Re: [Coco] rebuild NitrOS9 with superIDE
>
>
> Yes I can boot from DW in this way but I cannot acess (or at least I
> don't know how) to make a floppy inside the HDB-DOS virtual drives. I
> can acess the nos9 sIDE through /i0 but none of the 255 virtual
> floppies.
>
> On Mon, Sep 24, 2012 at 10:10 AM, Bill Pierce <ooogalapasooo at aol.com> wrote:
>>
>> Can't you boot HDBDOS for DW, then DW drives?
>> In a letter Mark sent me, helping someone else, he stated:
>>
>> ***********
>> He needs to flip the switch on the sIDE(SuperIDE) up, so that all
> configuration switches are up.
>> This will then have the boot rom for HDB-DOS to talk to DW server. Doesn't
> matter DW3 or DW4, it all works.
>> ************
>> This will boot HDBDOS into DW. Mount a good boot for sIDE in DW (nitro
> repository), boot, make new disk, cobbler, ezgen, save, then use sidewalk. I'm
> not real sure of the process as I do not have an sIDE, but it was working for
> the OP
>>
>> Hope it helps
>> Bill P
>>
>> Music from the Tandy/Radio Shack Color Computer 2 & 3
>> https://sites.google.com/site/dabarnstudio/
>> Bill Pierce
>> ooogalapasooo at aol.com
>>
>>
>>
>>
>> -----Original Message-----
>> From: Retro Canada <retrocanada76 at gmail.com>
>> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>> Sent: Mon, Sep 24, 2012 9:36 am
>> Subject: Re: [Coco] rebuild NitrOS9 with superIDE
>>
>>
>> hmm that's my problem: I don't have a multipak. I can't use the sIDE
>> and the floppy at same time :(
>>
>> On Mon, Sep 24, 2012 at 9:22 AM, Bill Pierce <ooogalapasooo at aol.com> wrote:
>>>
>>> I run Kings Quest 3 a lot. So I had to create a boot with the VDG & VRN
>> drivers
>>>
>>>
>>> try using EZGen, Just Cobbler a disk ("cobbler /d0") with a "good" boot, the
>> type:
>>>
>>> ezgen /d0/os9boot
>>> L pipeman
>>> i vi
>>> i vrn
>>> i v1
>>> i v2
>>> L term
>>> i covdg
>>> <enter>
>>>
>>> A new boot should be created with the vdg drivers.
>>> It will not change your initial /term, to get the vdg just type:
>>> "shell i=/v1&"
>>>
>>> Of cource your Dir will have to be set to where your modules are and the
> names
>> may be a little different.
>>> EZGen was in the archives, pretty sure it's in the Repository
>>>
>>> Bill P
>>>
>>> Music from the Tandy/Radio Shack Color Computer 2 & 3
>>> https://sites.google.com/site/dabarnstudio/
>>> Bill Pierce
>>> ooogalapasooo at aol.com
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Retro Canada <retrocanada76 at gmail.com>
>>> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>>> Sent: Mon, Sep 24, 2012 9:00 am
>>> Subject: [Coco] rebuild NitrOS9 with superIDE
>>>
>>>
>>> Hi,
>>>
>>> I have a superIDE and a floppy drive (FD-500). But I don't have a
>>> multipak. I want to rebuild the NitrOS-9 Boot because the cloud-9
>>> stock distro comes without any support to 32 columns and the drivers
>>> needed to run Sierra games and others. So far I split the process in
>>> two: first using drivewire with the FD-500 plugged and second plugging
>>> the sIDE.
>>>
>>> I stared generating a floppy through drivewire (copying the missing
>>> CLOUD9 drivers into it) and using the bootlist as follows in this
>>> email I generated a 35 track floppy using the following boot track:
>>>
>>> format /d0 1 '35' "NitrOS-9 Boot" r
>>> merge ../MODULES/BOOTTRACK/rel_32 ../MODULES/BOOTTRACK/boot_ide
>>> ../MODULES/BOOTTRACK/krn>bttemp
>>> os9gen /d0 -t=bttemp<../BOOTLISTS/superdriver_ide.bl
>>>
>>> And after using drivewire (with HDB-DOS translation) I can backup from
>>> the generated floppy into a DSK image on PC and using SIDEWalk I can
>>> copy this DSK in to the CF virtual drive 255. Then , plugging the sIDE
>>> back I run LINK.BAS wich finds correctly the boot track and links the
>>> disk.
>>>
>>> But when booting from DOS 255, the NitrOS-9 Boot starts in 32-colunmn
>>> mode but fails after reading all modules.
>>>
>>> What could I be missing ? The floppy does contains an IDE boot track
>>> and the modules file has the all ide support as well as the
>>> .../CLOUD9/dd_ide_256mb_CFpart.dd There is only this DD module on it.
>>>
>>> I managed to create a similar DW build in 32 columns (changin of
>>> course to boot_dw) where I included all the ide support. So booting
>>> from this drivewire distro I can use the sIDE and play all the Sierra
>>> games on it but I wanto to change the installed CF boot too.
>>>
>>> Am I missing something ? I use the 3.2.9 6809L2 and a 512K coco3.
>>>
>>> Thanks,
>>>
>>> Here comes the bootlists/superdriver_ide.bl:
>>>
>>> * Kernel/System Section
>>> *
>>> * These modules are mandatory.
>>> ../MODULES/KERNEL/krnp2
>>> *../MODULES/KERNEL/krnp3_perr
>>> *../MODULES/KERNEL/krnp4_regdump
>>> ../MODULES/SYSMODS/ioman
>>> ../MODULES/SYSMODS/init
>>> *
>>> ***************************************
>>> * CDF Section (HawkSoft)
>>> *
>>> *../MODULES/CDF/cdf.mn
>>> *
>>> * CDF descriptors - select as needed
>>> * SCSI descriptors (IDs 0-6)
>>> *../MODULES/CDF/sc0.dd
>>> *../MODULES/CDF/sc1.dd
>>> *../MODULES/CDF/sc2.dd
>>> *../MODULES/CDF/sc3.dd
>>> *../MODULES/CDF/sc4.dd
>>> *../MODULES/CDF/sc5.dd
>>> *../MODULES/CDF/sc6.dd
>>> * IDE descriptors (master/slave)
>>> *../MODULES/CDF/ic0.dd
>>> *../MODULES/CDF/ic1.dd
>>> *
>>> ***************************************
>>> * RBF Section
>>> *
>>> ../MODULES/RBF/rbf.mn
>>> *
>>> * DriveWire 3 driver
>>> ../MODULES/RBF/rbdw3.dr
>>> ../MODULES/RBF/dw3.sb
>>> * DriveWire descriptors - select as needed
>>> *../MODULES/RBF/ddx0.dd
>>> ../MODULES/RBF/x0.dd
>>> ../MODULES/RBF/x1.dd
>>> ../MODULES/RBF/x2.dd
>>> ../MODULES/RBF/x3.dd
>>> *
>>> * SuperDriver Package (Cloud-9 product)
>>> ../MODULES/RBF/rbsuper.dr
>>> * Select Low level SCSI and/or IDE driver
>>> ../MODULES/RBF/lltc3.dr
>>> ../MODULES/RBF/llide.dr
>>> * SuperDriver descriptors - select as needed
>>> * TC^3 SCSI DD descriptor (ID 0)
>>> *../MODULES/RBF/dds0_tc3.dd
>>> * TC^3 SCSI descriptors (IDs 0-6)
>>> *../MODULES/RBF/s0_tc3.dd
>>> *../MODULES/RBF/s1_tc3.dd
>>> *../MODULES/RBF/s2_tc3.dd
>>> *../MODULES/RBF/s3_tc3.dd
>>> *../MODULES/RBF/s4_tc3.dd
>>> *../MODULES/RBF/s5_tc3.dd
>>> *../MODULES/RBF/s6_tc3.dd
>>> * TC^3 SCSI HDB-DOS descriptor
>>> ../MODULES/RBF/sh_tc3.dd
>>> * IDE DD descriptor (Master)
>>> *../MODULES/RBF/ddi0_ide.dd
>>> * IDE descriptors (master/slave)
>>> *../MODULES/RBF/i0_ide.dd
>>> *../MODULES/RBF/i1_ide.dd
>>> * IDE HDB-DOS descriptor
>>> ../MODULES/RBF/ih_ide.dd
>>> * Cloud-9 SuperDriver descriptors - select as needed
>>> * SCSI Cloud-9 descriptors
>>> *.../CLOUD9/dd_scsi_127mb_hdpart.dd
>>> .../CLOUD9/s0_scsi_127mb_hdpart.dd
>>> * IDE Cloud-9 descriptors
>>> *.../CLOUD9/dd_ide_128mb_CFpart.dd
>>> .../CLOUD9/dd_ide_256mb_CFpart.dd
>>> *.../CLOUD9/i0_ide_128mb_CFpart.dd
>>> *.../CLOUD9/i0_ide_256mb_CFpart.dd
>>> *
>>> * WD1773 floppy support for Tandy and compatible disk controllers
>>> ../MODULES/RBF/rb1773.dr
>>> * WD1773 floppy support for Disto Super Controller II
>>> *../MODULES/RBF/rb1773_scii_ff74.dr
>>> *../MODULES/RBF/rb1773_scii_ff58.dr
>>> * Floppy device descriptors
>>> * DD - default device - choose one if needed
>>> *../MODULES/RBF/ddd0_35s.dd
>>> *../MODULES/RBF/ddd0_40d.dd
>>> *../MODULES/RBF/ddd0_80d.dd
>>> * D0 - drive 0 - choose one if needed
>>> *../MODULES/RBF/d0_35s.dd
>>> ../MODULES/RBF/d0_40d.dd
>>> *../MODULES/RBF/d0_80d.dd
>>> * D1 - drive 1 - choose one if needed
>>> *../MODULES/RBF/d1_35s.dd
>>> ../MODULES/RBF/d1_40d.dd
>>> *../MODULES/RBF/d1_80d.dd
>>> * D2 - drive 2 - choose one if needed
>>> *../MODULES/RBF/d2_35s.dd
>>> ../MODULES/RBF/d2_40d.dd
>>> *../MODULES/RBF/d2_80d.dd
>>> * D3 - drive 3 - choose if needed
>>> *../MODULES/RBF/d3_35s.dd
>>> *
>>> * RAMDisk driver
>>> *../MODULES/RBF/rammer.dr
>>> * RAMDisk descriptors - select as needed
>>> *../MODULES/RBF/ddr0_8k.dd
>>> *../MODULES/RBF/ddr0_96k.dd
>>> *../MODULES/RBF/ddr0_128k.dd
>>> *../MODULES/RBF/ddr0_192k.dd
>>> *../MODULES/RBF/r0_8k.dd
>>> *../MODULES/RBF/r0_96k.dd
>>> *../MODULES/RBF/r0_128k.dd
>>> *../MODULES/RBF/r0_192k.dd
>>> * Memory device descriptor
>>> *../MODULES/RBF/md.dd
>>> ***************************************
>>> * SCF Section
>>> *
>>> ../MODULES/SCF/scf.mn
>>> *
>>> * CoCo 3 I/O sub-drivers
>>> * Keyboard modules: choose cc3 for CoCo 3 keyboard
>>> ../MODULES/SCF/vtio.dr
>>> ../MODULES/SCF/keydrv_cc3.sb
>>> * Sound module: CoCo 3 built-in sound generator
>>> ../MODULES/SCF/snddrv_cc3.sb
>>> * Joystick modules: choose joy for hi-res joystick adapter or
>>> * (M)icrosoft or (L)ogitech mouse using 6551 or 6552 ACIA
>>> ../MODULES/SCF/joydrv_joy.sb
>>> *../MODULES/SCF/joydrv_6551M.sb
>>> *../MODULES/SCF/joydrv_6552M.sb
>>> *../MODULES/SCF/joydrv_6551L.sb
>>> *../MODULES/SCF/joydrv_6552L.sb
>>> *
>>> * CoGrf/CoWin subroutine module
>>> * Use CoWin with Multi-Vue; use CoGrf
>>> * for basic text and graphic window support..
>>> * Select only one.
>>> ../MODULES/SCF/cogrf.io
>>> *../MODULES/SCF/cowin.io
>>> *
>>> * CoVDG I/O subroutine module
>>> * Select one or both
>>> *../MODULES/SCF/covdg.io
>>> *../MODULES/SCF/covdg_small.io
>>> *
>>> * Select only one term descriptor
>>> ../MODULES/SCF/term_vdg.dt
>>> *../MODULES/SCF/term_win40.dt
>>> *../MODULES/SCF/term_win80.dt
>>> *../MODULES/SCF/term_scbbt.dt
>>> *../MODULES/SCF/term_sc6551.dt
>>> *
>>> * Select as many window descriptors as needed
>>> ../MODULES/SCF/w.dw
>>> ../MODULES/SCF/w1.dw
>>> ../MODULES/SCF/w2.dw
>>> ../MODULES/SCF/w3.dw
>>> ../MODULES/SCF/w4.dw
>>> ../MODULES/SCF/w5.dw
>>> ../MODULES/SCF/w6.dw
>>> ../MODULES/SCF/w7.dw
>>> ../MODULES/SCF/w8.dw
>>> ../MODULES/SCF/w9.dw
>>> ../MODULES/SCF/w10.dw
>>> ../MODULES/SCF/w11.dw
>>> ../MODULES/SCF/w12.dw
>>> ../MODULES/SCF/w13.dw
>>> ../MODULES/SCF/w14.dw
>>> ../MODULES/SCF/w15.dw
>>> *
>>> * Select as many VDG window descriptors as needed
>>> *../MODULES/SCF/v1.dw
>>> *../MODULES/SCF/v2.dw
>>> *../MODULES/SCF/v3.dw
>>> *../MODULES/SCF/v4.dw
>>> *../MODULES/SCF/v5.dw
>>> *../MODULES/SCF/v6.dw
>>> *../MODULES/SCF/v7.dw
>>> *
>>> * Serial port drivers
>>> * CoCo Bit-Banger terminal port
>>> *../MODULES/SCF/scbbt.dr
>>> *../MODULES/SCF/t1_scbbt.dd
>>> * 6551 ACIA
>>> *../MODULES/SCF/sc6551.dr
>>> *../MODULES/SCF/t2_sc6551.dd
>>> *../MODULES/SCF/t3_sc6551.dd
>>> * Tandy Modem Pak
>>> *../MODULES/SCF/modpak.dr
>>> *../MODULES/SCF/m1.dd
>>> *../MODULES/SCF/m2.dd
>>> *
>>> * Printer drivers
>>> * ../MODULES/SCF/scbbp.dr
>>> * ../MODULES/SCF/p_scbbp.dd
>>> *
>>> * DriveWire 3 Printer drivers
>>> ../MODULES/SCF/scdwp.dr
>>> ../MODULES/SCF/p_scdwp.dd
>>> *
>>> * DriveWire Networking
>>> *../MODULES/SCF/scdwn.dr
>>> *../MODULES/SCF/term_scdwn.dt
>>> *../MODULES/SCF/n_scdwn.dd
>>> *../MODULES/SCF/n1_scdwn.dd
>>> *../MODULES/SCF/n2_scdwn.dd
>>> *../MODULES/SCF/n3_scdwn.dd
>>> *../MODULES/SCF/n4_scdwn.dd
>>> *../MODULES/SCF/n5_scdwn.dd
>>> *../MODULES/SCF/n6_scdwn.dd
>>> *../MODULES/SCF/n7_scdwn.dd
>>> *../MODULES/SCF/n8_scdwn.dd
>>> *../MODULES/SCF/n9_scdwn.dd
>>> *../MODULES/SCF/n10_scdwn.dd
>>> *../MODULES/SCF/n11_scdwn.dd
>>> *../MODULES/SCF/n12_scdwn.dd
>>> *../MODULES/SCF/n13_scdwn.dd
>>> *../MODULES/SCF/n14_scdwn.dd
>>> *
>>> * VRN is a driver module used by certain games, including King's Quest III,
>>> * Leisure Suit Larry and Flight Simulator II. A /nil descriptor is also
>>> * supported.
>>> ../MODULES/SCF/vrn.dr
>>> ../MODULES/SCF/vi.dd
>>> ../MODULES/SCF/ftdd.dd
>>> *
>>> ***************************************
>>> * Pipe Section
>>> *
>>> * Pipes are a useful but optional part of a system.
>>> ../MODULES/PIPE/pipeman.mn
>>> ../MODULES/PIPE/piper.dr
>>> ../MODULES/PIPE/pipe.dd
>>> *
>>> ***************************************
>>> * Clock Section
>>> *
>>> * Select one clock module depending upon your power line frequency
>>> * (60Hz = USA/Canada; 50Hz = Europe, Australia)
>>> ../MODULES/CLOCKS/clock_60hz
>>> *../MODULES/CLOCKS/clock_50hz
>>> * Select one clock2 module that supports your real-time clock, if any.
>>> * Besides support for the internal software clock, the following
>>> * hardware clocks are supported: Burke & Burke, Disto 2-N-1, Disto 4-N-1,
>>> * Eliminator, Harris, SmartWatch, Cloud-9 (SuperIDE), the MESS emulator, Jeff
>>> * Vavasour's CoCo emulator and DriveWire
>>> *../MODULES/CLOCKS/clock2_soft
>>> *../MODULES/CLOCKS/clock2_bnb
>>> *../MODULES/CLOCKS/clock2_disto2
>>> *../MODULES/CLOCKS/clock2_disto4
>>> *../MODULES/CLOCKS/clock2_elim
>>> *../MODULES/CLOCKS/clock2_harris
>>> *../MODULES/CLOCKS/clock2_smart
>>> *../MODULES/CLOCKS/clock2_jvemu
>>> *../MODULES/CLOCKS/clock2_messemu
>>> ../MODULES/CLOCKS/clock2_cloud9
>>> *../MODULES/CLOCKS/clock2_dw3
>>> *
>>> ***************************************
>>> * System Kick-Start Module
>>> *
>>> * Choose which startup module you wish to use. (sysgo_dd is recommended
>>> * for most configurations.)
>>> *
>>> * Alternatively, this module can reside in the root directory of the
>>> * boot device, saving precious system RAM.
>>> *../MODULES/SYSMODS/sysgo_dd
>>> *../MODULES/SYSMODS/sysgo_h0
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>>
>> --
>> Panasonic FSA1-WSX
>> Commodore 64
>> Commodore 64C
>> Commodore 128
>> Apple //c
>> TRS-Color Computer 3
>> TI-99/4A
>> ..and more coming!
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>
>
> --
> Panasonic FSA1-WSX
> Commodore 64
> Commodore 64C
> Commodore 128
> Apple //c
> TRS-Color Computer 3
> TI-99/4A
> ..and more coming!
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
--
Panasonic FSA1-WSX
Commodore 64
Commodore 64C
Commodore 128
Apple //c
TRS-Color Computer 3
TI-99/4A
..and more coming!
More information about the Coco
mailing list